ColdStar nd1r Operator's Manual - Page 5

Browse online or download pdf Operator's Manual for Dispenser ColdStar nd1r. ColdStar nd1r 8 pages. Refrigerated liquid dispensers

Print Page
SET UP
INSTRUCTIONS
!!! Very Important !!!
Before plugging it in, be sure the dispenser has been in an upright position for
twenty-four hours to allow the oil in the compressor to settle after shipping.
The dispenser is fully assembled - here's all you do:
1.
Place it: Take the dispenser to the location where it will be used. Ensure access to a
properly grounded 120 volt AC electrical outlet.
2.
Plug it in: Plug one end of the power cord into the Power Module on the back of unit, the
other into the grounded 120 volt AC outlet. Maintain at least a minimum 3 inch clearance
from the filter on rear of machine.
3.
Turn it on: Press the on-off switch on the Power Module on the back of the unit. Be sure
the power indicator light is lit.
4.
Let it run: Run for 15 minutes to become fully chilled before loading the flrst bag of product.
5.
Load it: See Optimum Bag descriptions below; see bag-loading instructions.
EXTENDED
SHELF
SHELF
STABLE
LIFE (ESL)
Proprietary Bag
Proprietary Bag
Be su re bag has been
Be su re bag has been
kept stored under
kept chilled to under
80 degrees
F.
41 degrees
F.
These bags are designed witll two bottom corners sealed off for easy loading.
Tile spout is near the bottom of the bag.
3