Shooting Operation
LCD Panel
Nomenclature
<o> AF mode selection/
Monochrome shooting
Drive mode selection button
<m> ISO speed
Shutter speed
setting/Flash exposure
<n> Metering mode selection/
compensation button
Image-recording quality
White balance selection button
<B>
Multi-function button
White balance
Mode Dial
Exposure level
<6>
indicator
Main Dial
Battery check
Shutter
button
OK
NG
Viewfinder Information
Focus mode switch
<A/k> Live View shooting/
<p>
Movie shooting switch
AF start button
Area AF
<0> Start/Stop
<A> AE lock button
frame
button
<S>
Power switch
AF point
AE lock
selection
<9>
button
Battery check
Multi-controller
<5> Quick
Flash-ready
Control Dial
<0>
Flash exposure
Setting button
compensation
Shutter speed
Quick Control Dial switch
Access lamp
Aperture
s: Shutter-priority AE
Fully-Automatic Modes (1/C)
Metering mode
All the settings necessary for
Aperture
shooting are set automatically. You
Shots remaining
just press the shutter button, and
the camera does the rest.
Fully-automatic modes
AF mode
Drive mode
1 Full Auto
AEB
f: Aperture-priority AE
C Creative Auto
ISO speed
C
(Displayed only when <
> is set.)
Flash exposure compensation
Press the <Q> button, then tilt <9> to select the function.
Turn the <6> or <5> dial to set the function.
Grid
d/s/f Modes
([6] tab)
You can change the camera settings
as desired to shoot in various ways.
* Set the Quick Control Dial switch to <
J
>.
D Using the Built-in Flash
Focus
d: Program AE
confirmation
light
Set the Mode Dial to <d>.
Max. burst
As with the <1> mode, when focus is achieved, the shutter
Monochrome shooting
speed and aperture will be automatically set.
ISO speed
Exposure level indicator
i: ISO SpeedN
Set the Mode Dial to <s>.
Press the <m> button, then
Turn the <6> dial to set the
turn the <6> dial.
desired shutter speed, then focus
ISO 100 to 6400 can be set in
the subject.
1/3-stop increments.
The aperture will be set
When "A" is selected, the ISO
automatically.
speed is set automatically. When
If the aperture display blinks, turn
you press the shutter button
the <6> dial until it stops blinking.
halfway, the ISO speed setting
will be displayed.
Set the Mode Dial to <f>.
Turn the <6> dial to set the
i
Drive ModeN
desired aperture, then focus the
o
Press the <
> button, then
subject.
5
turn the <
> dial.
The shutter speed will be set
automatically.
u: Single shooting
If the shutter speed display blinks,
o: High-speed continuous
turn the <6> dial until it stops
shooting
blinking.
i: Low-speed continuous
shooting
Q: 10-sec. self-timer/
Remote control*
Press the <D> button to pop up
the built-in flash, then shoot.
k: 2-sec. self-timer/
In the Full Auto (1) mode, the
Remote control
built-in flash will pop up and fire
* This drive mode <Q> can be set
automatically under low-light or
in all shooting modes.
backlit conditions.
f: AF ModeN
AF Area Selection Mode
Set the lens focus mode switch
Press the <S> button.
to <f>.
Look through the viewfinder and
Press the <o> button,
press the <B> button.
6
then turn the <
> dial.
X
(One-Shot AF):
For still subjects
You can set the selection modes that can be selected with
9
[8C.Fn III -6: Select AF area selection mode].
(AI Focus AF):
Switches the AF mode automatically
A Live View Shooting
Z
(AI Servo AF):
For moving subjects
Set the switch to < A >.
S AF Point Manual SelectionN
Press the <0> button and the
Live View image will appear on
the LCD monitor.
Press the <S> button, then
look through the viewfinder.
Press the shutter button halfway
The AF point selection will
to focus, then press it completely
change in the direction you tilt
to shoot.
the <9>. If you press <9>
Press the <0> button to stop
straight down, the center AF
the Live View shooting.
point (or zone) will be selected.
The <6> dial selects an AF
You can set Live View shooting settings with the menu
point in the horizontal direction,
options under the [z] tab.
and the <5> dial selects an AF
Battery Life with Live View Shooting
point in the vertical direction.
Temperature
No Flash
At 23°C / 73°F
Approx. 230 shots
k Shooting Movies
Set the switch to <k>.
The image will appear on the
LCD monitor.
Press the shutter button halfway to
focus.
Press the <0> button to start
shooting a movie. To stop movie
shooting, press the <0> button
again.
To shoot still photos, press the
shutter button.
When the shooting mode is <a>, you can shoot movies
with manual exposure.
You can set movie shooting settings with the menu options
under the [x] tab.
50% Flash Use
Approx. 220 shots
Print Page