Akyga AK-L1-100 User Manual - Page 4

Browse online or download pdf User Manual for Power Supply Akyga AK-L1-100. Akyga AK-L1-100 4 pages.

Print Page
AK-L1-100 - user manual
Connecting the Power Supply to
1.
Prepare the 3-wire power cable.
2.
Remove the insulation from the ends of the cables (about 0.5 cm).
3.
Screw the cables: phase conductor (brown) to L connector, neutral conductor (blue) to
N connector, protective conductor (yellow-green) to FG /
4.
Turn on the power.
1
2
3
4
5
6
7
8
9
Cleaning the power supply:
Disconect the power supply from the electrical socket and connected devices before cleaning.
Use soft and antistatic cloth for cleaning the power supply.
ź
Do not use abrasive or chemical cleaners.
ź
Technical specfication
Product code:
Supply voltage:
Output voltage and amperage:
Maximum power:
Voltage adjustment:
Efficiency:
Temperature:
Storage temperature:
OVP (over voltage protection):
OCP (over current protection):
OPP (overpower protection):
OTP (over temperaturre protection):
SCP (short circuit protection):
Power supply connector:
Output connector:
IP Rating:
Compilance with standards:
REACH compatibility:
EAN code:
Product manufacturer:
energy grid
WARNING!
Make sure that the cables are not live.
1. Phase conductor connector (L).
2. Neutral conductor connector (N).
3. Protective conductor connector (
4.
Output connector from the power
supply
(COM).
5.
Output connector from the power
supply
(COM).
6. Output connector from the power
supply (-V).
7. Output connector from the power
supply (+V).
8. Potentiometer for changing the output
voltage (+V ADJ).
9. LED diode indicating that the power
supply is on.
:
.
110-265V , 50/60Hz
CE, FCC, RoHS
5901720135001
Ropla Computers sp. z o.o.
ul. Wrocławska 1c
52-200 Suchy Dwór
).
AK-L1-100
12V / 8.3A
100W
11-15 V
80%
5-50ºC
-40/+80ºC
Yes
Yes
Yes
Yes
Yes
Screw
Screw
IP20
YES
p. 4