DAELECTRONICS iCtrl-R-mini Operational Manual - Page 5
Browse online or download pdf Operational Manual for Recording Equipment DAELECTRONICS iCtrl-R-mini. DAELECTRONICS iCtrl-R-mini 8 pages. Pocket midi controller
Also for DAELECTRONICS iCtrl-R-mini: Operational Manual (8 pages), Operational Manual (8 pages), Operation Manual (8 pages)
Print Page
External Expression pedal
When an expression pedal is connected to an iCtrl-R mini , it will be always active and communicates via the control change #10 (values f rom 01 to
127). In addition when the pedal is set at minimum heel a CC #66 with value =0 will be sent after 400 millisecond, a CC #66 with value =127 will be
sent when the pedal is at maximum toe setting after 50ms. You can then switch on off an effect to be controlled by the expression pedal assigning
CC#66 to it.
Vslider
It's a motion detection sensor located on the right side of the box that is always active and communicates via the control change # 127 (values
from 01 to 127).
With this sensor you can send continuous MIDI CC by moving back and forth the foot or the hands from the sensor. Led #9 will be off (a CC #55 with
value =0 will be sent) after 4 00ms when you move away the foot or the hand from the sensor. Led #9 will be on and a CC #55 with value =127 will
be sent after holding the foot in front of the sensor for 5 0ms. You can then switch on off an effect to be controlled by the Vslider assigning CC#55
to it.
To pair Vslider with a modular pedal effect in your Bias sotware (iPhone/iPad) just add your preferred one, for example Cry Wah, to a preset of
yours then click Options on top right, then MIDI Settings / MIDI Control Assignments and give to Toggle Cry Wah CC # 55 and to Cry Wah - Wah CC
# 127. Press Done and save your preset. Doing so, you will be able to turn on / off the Cry Wah and to module it like you could do with a ph y sic al
pedal expression!
4