DOREMIDI MPC-10 Instructions Manual - Page 9

Browse online or download pdf Instructions Manual for Media Converter DOREMIDI MPC-10. DOREMIDI MPC-10 9 pages. Midi pedal converter
Also for DOREMIDI MPC-10: Instructions Manual (8 pages)

Print Page

6. Q&A

Question: The pedal type detected on the configuration software is incorrect.

Answer:

 Please make sure that the pedal has been connected to MPC-10 normally.

 If you are connecting an expression pedal, please try to place the pedal in the middle range,

and then click "SENSE" to detect.

Question: Is it possible to set MIDI messages if no pedal is connected?

Answer: Yes, but only the expression pedal and sustain pedal can be set, and the dual pedal

function cannot be set. After setting, you must ensure that the corresponding pedal type is

connected correctly during use. (It is recommended to connect the pedal before setting, so as to

avoid setting errors)

Question: The USB cannot be connected to the computer.

 After confirming the connection, whether the indicator light flashes;

 Confirm whether the computer has a MIDI driver. Generally speaking, the computer comes

with a MIDI driver. If you find that the computer does not have a MIDI driver, you need to

install the MIDI driver. Installation method: https://windowsreport.com/install-midi-drivers-

pc/

If the problem is not resolved, please contact customer service.

Manufacturer: Shenzhen HuaShi Technology Co., Ltd.

Address: Room 9A, 9th Floor, Kechuang Building, Quanzhi Science and Technology Innovation Park,

Shajing Street, Baoan District, Shenzhen, Guangdong Province

Customer Service Email: [email protected]