DOREMIDI MTC-20 Instructions Manual - Page 3

Browse online or download pdf Instructions Manual for Recording Equipment DOREMIDI MTC-20. DOREMIDI MTC-20 6 pages. Ltc-midi timecode sync

Print Page
3. Product Parameters
Name
Model
Size (L x W x H)
Weight
Timecode Generator
LTC Compatibility
USB Compatibility
MIDI Compatibility
Operating Voltage
Working current
Firmware upgrade
4. Steps for usage
1. Power supply: Power MTC-10 through the USB-B interface with a voltage of 5VDC, and
the power indicator will light up after the power is supplied.
2. Connect to the computer: Connect to the computer through the USB-B interface.
3. Connect the MIDI device: Use a standard 5-Pin MIDI cable to connect the MIDI OUT of
the MTC-10 to the IN of the MIDI device, and the MIDI IN of the MTC-10 to the OUT of
the MIDI device.
4. Connect LTC devices: Use standard 3-Pin XLR cable to connect LTC OUT of MTC-10 to
LTC IN of LTC devices, and LTC IN of MTC-10 to LTC OUT of LTC devices.
5. Set the timecode input source
By clicking the knob, you can select different setting items, and rotating the knob to
change the parameters of the setting items. When MTC-20 is used as a time code
converter/reader, please select the correct time code input source "USB/MIDI/LTC"
according to the time code input port. When the MTC-20 is used as a time code generator,
please select "GEN". The following are descriptions of the 4 timecode input sources:
Souce
SOURCE: USB
00:00:00:00
USB
FPS:30DF
MTC-20
88*79*52mm
180g
Supports generating timecode in 24, 25, 30DF, 30 frame formats
Compatible with SMPTE LTC standard audio signal
Compatible with Windows, Mac, iOS, Android and other systems, plug and
play, no driver installation required
Compatible with all MIDI devices with MIDI standard interface
5VDC, supply power to the product through the USB-B interface
About 40mA
Support firmware upgrade
Display
Timecode input from USB, MIDI OUT will output MIDI
timecode, LTC OUT will output LTC timecode.
OFF
Description
Description
USB
MIDI OUT
LTC OUT