Cole Parmer Electrothermal MC227 Instruction Manual - Page 13
Browse online or download pdf Instruction Manual for Controller Cole Parmer Electrothermal MC227. Cole Parmer Electrothermal MC227 20 pages. Heating controller
Print Page
9. MAINTENANCE
9. MAINTENANCE
9.
9.1. General Information.
MAINTENANCE
9.1. General Information.
9.1. General Information.
maintenance tasks.
maintenance tasks.
Unplug the unit from the mains voltage supply and allow it to cool before
Maintenance should only be carried out under the direction of the
undertaking any maintenance tasks.
Responsible Body, by a competent electrician. Failure to do so may
Maintenance should only be carried out under the direction of the
result in damage to the product and in extreme cases be a danger to the
Responsible Body, by a competent electrician. Failure to do so may result in
Maintenance should only be carried out under the direction of the
end user.
Maintenance should only be carried out under the direction of the Responsible Body, by
damage to the product and in extreme cases be a danger to the end user.
Responsible Body, by a competent electrician. Failure to do so may result in
a competent electrician. Failure to do so may result in damage to the product and in extreme
With proper care in operation this equipment has been designed to give many years
damage to the product and in extreme cases be a danger to the end user.
cases be a danger to the end user.
of reliable service. Contamination or general misuse will reduce the effective life of
With proper care in operation this equipment has been designed to give many years
this product and may cause a hazard.
of reliable service. Contamination or general misuse will reduce the effective life of
With proper care in operation this equipment has been designed to give many years
With proper care in operation this equipment has been designed to give many years of reliable
this product and may cause a hazard.
of reliable service. Contamination or general misuse will reduce the effective life of
service. Contamination or general misuse will reduce the effective life of this product and may
Maintenance for the unit should include:
this product and may cause a hazard.
cause a hazard.
• Periodic electrical safety testing (an annual test is recommended as the minimum
Maintenance for the unit should include:
requirement).
Maintenance for the unit should include:
Maintenance for the unit should include:
• Regular inspection for damage with particular attention to the mains lead and
Periodic electrical safety testing (an annual test is recommended as the
•
Periodic electrical safety testing (an annual test is recommended as the minimum
•
plug set.
minimum requirement).
Periodic electrical safety testing (an annual test is recommended as the
•
requirement).
minimum requirement).
Regular inspection for damage with particular attention to the mains lead an
• Routine cleaning of the equipment should be undertaken using a clean cloth.
•
Regular inspection for damage with particular attention to the mains lead and plug set.
•
plug set.
Regular inspection for damage with particular attention to the mains lead an
•
• Check the ventilation slots are clear.
Routine cleaning of the equipment should be undertaken using a clean cloth.
•
plug set.
Routine cleaning of the equipment should be undertaken using a clean cloth
•
Check the ventilation slots are clear.
•
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
Routine cleaning of the equipment should be undertaken using a clean cloth
•
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
9.2. Replacing controller fuse.
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
DO NOT USE SOLVENTS FOR CLEANING ANY PART OF THIS EQUIPMENT.
The mains fuse holder is located at rear your product. Refer to 'Fuse Rating' in the
9.2. Fuse Replacement.
Technical Specification section for correct fuse type and rating. Turn your product
MC242 (230V)
9.2. Fuse Replacement.
off and remove it from the mains supply. Open fuse draw and remove fuses. Fit
The mains fuse holder is located at rear your product. Refer to Technical Specification, 'Fuse
The mains fuse holder is located at the side of this product. Refer to Technical
replacement fuses and close the draw.
Rating' for correct fuse type and rating. Turn your product off and remove it from the mains
Specification, 'Fuse Rating' for correct fuse type and rating. Turn your product off an
The mains fuse holder is located at the side of this product. Refer to Technical
supply. Open fuse draw and remove fuses. Fit replacement fuses and close the draw.
remove it from the mains supply. Open fuse draw and remove fuses. Fit replaceme
Specification, 'Fuse Rating' for correct fuse type and rating. Turn your product off an
fuses and close the draw.
remove it from the mains supply. Open fuse draw and remove fuses. Fit replaceme
fuses and close the draw.
MC242X1 (115V)
Unscrew both fuse holder caps from the fuse housings and
fuses of the correct rate and value (see section 11 – Spares and accessories).
Unplug the unit from the mains voltage supply and allow it to cool
Unplug the unit from the mains voltage supply before undertaking any
before undertaking any maintenance tasks.
Unplug the unit from the mains voltage supply before undertaking any
remove the fuses. Fit replacement
13