DOREMIDI MIDI Network Box Pro Instructions Manual - Page 7

Browse online or download pdf Instructions Manual for Gateway DOREMIDI MIDI Network Box Pro. DOREMIDI MIDI Network Box Pro 7 pages.

Print Page

7. Precautions

1. This product contains a circuit board.

2. Rain or immersion in water may cause the product to malfunction.

3. Do not heat, press, or damage internal components.

4. Non-professional maintenance personnel are not allowed to disassemble the product.

5. The working voltage of the product is 5VDC, using a voltage lower or exceeding this voltage

may cause the product to fail to work or be damaged.

8. Q&A

Question: The MIDI OUT/IN interface does not work.

Answer: Please make sure that the "MIDI OUT" of the product is connected to the "MIDI IN" of the

instrument, and the "MIDI IN" of the product is connected to the "MIDI OUT" of the instrument.

Question: In the listener mode, the computer does not find the MR-1 Pro.

Answer: Please make sure that the computer and MR-1 Pro are in the same local area network.

If it is not resolved, please refer to "DOREMiDi Network MIDI Configuration Manual.pdf" at

www.doremidi.cn.

Question: In the initiator mode, the MR-1 Pro cannot connect to RTP MIDI devices.

Answer: Please make sure that it is the RTP MIDI device of DOREMiDi. In addition, please make

sure that the RTP MIDI device and MR-1 Pro are in the same local area network.

Question: iPhone cannot be connected, but other devices can be connected.

Answer: Please turn off the private address switch in the mobile network settings.

If the problem is not resolved, please contact customer service.

Manufacturer: Shenzhen HuaShi Technology Co., Ltd.

Address: Room 910, 9th Floor, Jiayu Building, Songgang Street, Baoan District, Shenzhen City,

Guangdong Province

Customer Service Email: [email protected]