Canon PowerShot SD430 DIGITAL ELPH WIRELESS Settings Manual - Page 7
Browse online or download pdf Settings Manual for Software Canon PowerShot SD430 DIGITAL ELPH WIRELESS. Canon PowerShot SD430 DIGITAL ELPH WIRELESS 23 pages. For camera-to-camera data transfer
Also for Canon PowerShot SD430 DIGITAL ELPH WIRELESS: Setup Manual (2 pages), System Map (2 pages), User Manual (20 pages), User Manual (7 pages)
Print Page
• Key Index (Transmit Key)
1
2
3
4
If you are using an AirPort network:
You can check the password by selecting your base station in the AirPort
Admin Utility and clicking the [key] icon in the window.
Check If Required Software Is Installed
Before configuring the wireless settings, confirm that the following software has been
installed.
Checking if the Software Supplied with the Camera Has Been Installed
Check to see if the software supplied with the camera has been installed. If it is not installed,
use the supplied Canon Digital Camera Solution Disk and install it according to the procedures
in Using the Software on the Macintosh Platform—Preparations (p. 47) in the Software &
Wireless Guide.
Installing the ImageBrowser Wireless Updater
Download the ImageBrowser Wireless Updater from the same website you downloaded this
guide from.
1
Confirm that ImageBrowser is installed on the computer.
ImageBrowser is normally installed if you have installed the software supplied with your
camera. If it is not installed, install it according to the procedures in Using the Software on
the Macintosh Platform—Preparations (p. 47) in the Software & Wireless Guide.
The Key Index is a key that is set
when the Network Authentication/
Data Encryption setting is WEP. Up to
four keys can be set for one access
point. Please place a check mark
beside the key index used by your
wireless network.
If you are using an AirPort network,
select [1].
Download
7