Asus AT4NM10T-I User Manual - Page 21
Browse online or download pdf User Manual for Motherboard Asus AT4NM10T-I. Asus AT4NM10T-I 44 pages. User manual
Print Page
2.
Serial ATA connectors (7-pin SATA_1, SATA_2, SATA_E1, SATA_E2)
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
AT4NM10T-I SATA 3.0Gb/s connectors
• Install the Windows
• The SATA3G_E1/E2 (black) connectors are for data drives only. ATAPI device is not
supported.
3.
USB connectors (10-1 pin USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable to this
connector, then install the module to a slot opening at the back of the system chassis.
This USB connector complys with USB 2.0 specification that supports up to 480 Mbps
connection speed.
AT4NM10T-I USB2.0 connector
Never connect a 1394 cable to the USB connector. Doing so will damage the motherboard!
The USB module cable is purchased separately.
1-11
SATA3G_E2
SATA3G_E1
XP Service Pack 3 or later version before using Serial ATA.
®
USB78
PIN 1
SATA3G_2
SATA3G_1
Chapter 1: Product introduction