daewon DIB-B830 User Manual - Page 11

Browse online or download pdf User Manual for Bathroom Fixtures daewon DIB-B830. daewon DIB-B830 19 pages.

Print Page

Operations

2X mode

If the stronger water pressure is preferred while a rear/

front wash, select and hold a button for 3 seconds

to change to 2X mode. 2X mode starts from Level 3

regardless previous setting.

Select and hold a rear/front wash button for 3 seconds

to initiate 2X mode rear/front wash.

Select once again to initiate nozzle oscillation. To cancel

the oscillation, select again.

To cancel 2X mode, select and hold a rear/front wash

button for 3 seconds.

Do not use 2X mode wash excessively and consult with a

doctor first if you have any anal disease or are sensitive.

For warm water temperature when using in a cold

environment, refer to the cautions in this manual.

Child wash (automatic wash)

Select a Child wash button to initiate an child wash that

offers from the wash until the drying function for children

and seniors.

Rear wash 20 seconds → Rear wash oscillation 20

seconds → Rear wash oscillation with pulsation for 20

seconds → Dry for 2 minutes will consecutively work.

Dry

※ Applicable models only

Select a dry button to initiate a 3 minutes air dryer cycle.

Dryer air temperature can be adjusted by +/- button. (5

levels)

For dryer air temperature when using in a cold

environment, refer to the cautions in this manual.

Pulsation

Select a pulsation button to initiate pulsation while

rear/front/turbo is running that enables the water

to repeatedly increase and decrease in pressure in a

pulsating pattern.

To cancel pulsation, select the pulsation button again.

Water pressure

Select a rear/front/turbo wash button to adjust water

pressure by +/- button. (5 levels)

If you feel that the water pressure is weaker than

usual, there may be small debris stuck in the water

supply screen filter or inline filter. Refer to maintenance

instructions in this manual.

Operations

Nozzle position

Select ◀ / ▶ during a wash cycle to adjust the nozzle

position forward and backward.

The 5 LED indicator lights will indicate different positions

3 seconds

selected.

Settings will be saved for the next use.

Seat temperature

Select a seat temperature button to adjust the seat

temperature to 1 of 4 settings.

Room temperature/off → low/green(34°C/93.2°F) →

medium/yellow(37°C/98.6°F) → high/red(40°C/104°F)

Settings will be saved for the next use.

If the seat is used 15 minutes consecutively when the

seat temperature is set at medium and high, the seat

temperature will be lowered automatically down to

35°C/95°F by 1°C/1.8°F every 5 minutes.

For safety, this bidet seat uses a low voltage for a heated

seat. It may take a little while to be heated at the

beginning.

Water temperature

Select a water temperature button to adjust the seat

temperature to 1 of 4 settings.

Room temperature/off → low/green(34°C/93.2°F) →

medium/yellow(37°C/98.6°F) → high/red(40°C/104°F)

Settings will be saved for the next use.

This bidet seat is an instant heating system with the

latest technology applied, and it does not consume any

electricity for the water heating in standby mode, saving

electricity.

If the bidet seat is used in a very cold area with high

water pressure, the warm water may not reach the set

temperature. Refer to the precaution in this manual.

Deodorizer

※ Applicable models only

The deodorizer starts automatically when a user sits on

the seat. It continues to run for one minute after the

seat has been vacated.

The deodorizing cartridge is semi-permanent but needs

to be cleaned regularly with a brush.

high medium low