Akyga AK-CA-16 User Manual - Page 2
Browse online or download pdf User Manual for Adapter Akyga AK-CA-16. Akyga AK-CA-16 3 pages.
Print Page
AK-CA-16 - user manual
The manufacturer of the product is not responsible for damage or insults caused in effect
of disobey the safety instructions and informations contained in these user manual.
Keep the product and the packaging out of range of children and animals. The package
ź
includes a foil that child could choke while playing.
It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or
ź
crushing may cause its damage.
The product operation in adverse conditions is not allowed. Adverse conditions are primarily:
ź
exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high
humidity, surrounds of gases, dusts or flammable and aggressive liquids.
If the product has been damaged, does not work properly or has been stored for a long period
ź
of time in bad or unfavorable conditions, safe operation of the device is not possible.
It is essential to stop using the product and to protect it against re-use for security purposes.
Take account of the user manual for other devices connected to the adapter.
ź
Product and power cord should not be touched with moist or wet hands under no
ź
circumstances.
Short-circuiting the current connection is prohibited.
ź
Its forbidden to modify the power cord. In the case of modifications, the cable may be
ź
damaged, causing threats to life, health and property.
The device is connected to the power source by plugging the Molex connector into the
ź
corresponding connector coming out of the ATX power supply.
When disconnecting the adapter from the socket, do not pull on the cord, but only on the part of
ź
the cable plug provided for this purpose.
In case of any doubts regarding operation, safety or connection of the product, please contact
ź
the manufacturer or a qualified specialist for this purpose.
All maintenance, adjustment and repair work on the product may only be carried out by
ź
a qualified person in a specialist facility.
Preparing the adapter for use:
1. Make sure that the power supply is disconnected from the power source.
2. Select and connect the SATA connectors to the devices you want to power.
3. Connect the Molex connector to the matching connector on the ATX power supply.
step 3
step 2
step 2
p. 2