Canon HDMI SX80 Supplementary Manual - Page 9

Browse online or download pdf Supplementary Manual for Projector Canon HDMI SX80. Canon HDMI SX80 10 pages. Brochure
Also for Canon HDMI SX80: Brochure & Specs (12 pages)

Print Page
Canon HDMI SX80 Supplementary Manual
e:F001 SYSTEM (UNKNOWN)
65h 3Ah 46h 30h 30h 31h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 55h 4Eh 4Bh 4Eh 4Fh 57h 4Eh 29h
e:F002 SYSTEM (AF)
65h 3Ah 46h 30h 30h 32h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 41h 46h 29h
e:F004 SYSTEM (AK)
65h 3Ah 46h 30h 30h 34h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 41h 4Bh 29h
e:F005 SYSTEM (ASC)
65h 3Ah 46h 30h 30h 35h 20h 20h 53h 59h 53h 54h 45h 4Dh 20h 28h 41h 53h 43h 29h
e:E0XX COMMUNICATION_ERROR
65h 3Ah 45h 30h <numerical code> 20h 43h 4Fh 4Dh 4Dh 55h 4Eh 49h 43h 41h 54h 49h 4Fh 4Eh 5Fh 45h 52h 52h 4Fh 52h
e:1008 INVALID_SCREEN_ASPECT
65h 3Ah 31h 30h 30h 38h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 53h 43h 52h 45h 45h 4Eh 5Fh 41h 53h 50h 45h 43h 54h
e:200X INVALID_SOURCE (***)
65h 3Ah 32h 30h 30h <numerical code> 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 53h 4Fh 55h 52h 43h 45h 20h 28h *** 29h
e:2010 NO_SIGNAL
65h 3Ah 32h 30h 31h 30h 20h 4Eh 4Fh 5Fh 53h 49h 47h 4Eh 41h 4Ch
e:0801 INVALID_VALUE
65h 3Ah 30h 38h 30h 31h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 56h 41h 4Ch 55h 45h
e:0802 INVALID_VALUE
65h 3Ah 30h 38h 30h 32h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 56h 41h 4Ch 55h 45h
e:1002 NO_LOGO_CAPTURED
65h 3Ah 31h 30h 30h 32h 20h 4Eh 4Fh 5Fh 4Ch 4Fh 47h 4Fh 5Fh 43h 41h 50h 54h 55h 52h 45h 44h
e:1003 IP_NOT_AVAILABLE
65h 3Ah 31h 30h 30h 33h 20h 49h 50h 5Fh 4Eh 4Fh 54h 5Fh 41h 56h 41h 49h 4Ch 41h 42h 4Ch 45h
e:1004 POWER_MANAGEMENT_OFF
65h 3Ah 31h 30h 30h 34h 20h 50h 4Fh 57h 45h 52h 5Fh 4Dh 41h 4Eh 41h 47h 45h 4Dh 45h 4Eh 54h 5Fh 4Fh 46h 46h
e:1005 DIRECT_POWER_ON
65h 3Ah 31h 30h 30h 35h 20h 44h 49h 52h 45h 43h 54h 5Fh 50h 4Fh 57h 45h 52h 5Fh 4Fh 4Eh
e:203X INVALID_RESOLUTION(***)
65h 3Ah 32h 30h 33h <numerical code> 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 52h 45h 53h 4Fh 4Ch 55h 54h 49h 4Fh 4Eh 28h *** 29h
i:INPUT_NOT_FOUND
69h 3Ah 49h 4Eh 50h 55h 54h 5Fh 4Eh 4Fh 54h 5Fh 46h 4Fh 55h 4Eh 44h
*
Error codes are four-digit hexadecimal strings. X represents a character in the range 0-9 or A-F.
*
Items with lower numbers are higher priority. (If multiple errors occur, the highest-ranked error is returned.
However, errors of the same number are ranked with the same priority.)
An internal error has occurred.
An internal error occurred at
AUTOSETEXE=FOCUS.
An internal error occurred at AUTOSETEXE=VKS.
An internal error occurred at AUTOSETEXE=SCRN. Resolve the error and resend the command.
A communication protocol violation has occurred in
the projector.
Cannot execute command under current screen
aspect setting.
Cannot execute command with current input source.
The current input source is indicated in parentheses.
No input signal.
Numerical parameters are invalid or out of range.
Numerical parameters are invalid or out of range.
Cannot execute processing. User image not
registered.
IP conversion not possible.
DPON=ON not available when PMM=OFF.
PMM=OFF not available when DPON=ON.
Invalid input signal resolution.
Accompanying information is indicated in
parentheses.
■ OVER_PANEL_RES: input signal resolution
exceeds panel resolution.
Input not switched. No input signal when
AUTOSETEXE=INPUT.
Resend the command.
Resolve the error and resend the command.
Resolve the error and resend the command.
Resend the command.
Change the screen aspect.
Change the input source.
Supply an input signal.
Specify parameters in the correct range.
Specify parameters in the correct range.
Register a user image.
Switch to a correct input signal.
Use a setting other than PMM=OFF.
Use the setting DPON=OFF.
Switch to an input signal of the correct resolution.
No particular measures regarding notification of status.