Canon LV 5210 - SVGA LCD Projector Specification - Page 18
Browse online or download pdf Specification for Projector Canon LV 5210 - SVGA LCD Projector. Canon LV 5210 - SVGA LCD Projector 47 pages. Expand serial command functional specification
Also for Canon LV 5210 - SVGA LCD Projector: Specification (22 pages)
Print Page
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.4.10 CF_IMAGECOMMAND
COMMAND
"CF_IMAGE_%1" [CR]
"STAND" ----- Standard（Image adjustment is set to factory default setting
value）
"REAL"
%1
natural tone.）
"CINEMA" ---- Cinema（Fixed value to focus on the tone reproduction for
"CUSTOM1" -- Custom（the value is set and store by a user）
Select an Image MODE.（When it is in usual Power ON state, this is valid.）
Parameter "CUSTOM1" is the same as selecting custom"Custom1" on OSD
Details
menu. The value set by this Command is stored in EEEPROM. When
ALL OFF the projector the value will return to the original setting.
Acceptable
Response
Unacceptable
8.4.11 CF_IMAGE ADJ COMMAND
COMMAND
"CF_IMAGEADJ_%1" [CR]
"RST"------Reset Image adjustment
%1
"STR1"----Store current image adjustment to Image 1
Reset or Store for image adjustment. (When it is in usual Power ON state,
"STR1" is the same as "Custom" when choosing" Store" on OSD menu. The
Details
setting value set in "Image1" to "Custom" is stored, so even if the projector is
set to ALL OFF and is turned on again, the setting value will be able to be
back.
Acceptable
Response
Unacceptable
8.5 PC Control COMMAND
8.5.1
CF_FSYNC COMMAND
COMMAND
"CF_FSYNC_%1" [CR]
"0000-0031"---- Directly set Fine Sync setting value
%1
"UP"------------------ Fine Sync setting value＋1
"DN"------------------ Fine Sync setting value-1
Set Fine Sync for PC signal（Only valid when it is in the usual Power ON
status.)
The value set by this Command will not be saved to the projector.
Details
Therefore, when ALL OFF the projector, the value will return to the original
setting.
（STANDBYMODE stays.）
Acceptable
Response
Unacceptable
------ High contrastl（Fixed value to display a graphic image with
movie.）
"000" [CR]
"Error Code" [CR]
this invalid.)
"000" [CR]
"Error Code" [CR]
"000" [CR]
"101" [CR] ----Input is-VIDEO
Page
18