Canon LV-5200 Owner's Manual - Page 26
Browse online or download pdf Owner's Manual for Projector Canon LV-5200. Canon LV-5200 48 pages. Canon lv-5200: user guide
Also for Canon LV-5200: Brochure & Specs (2 pages)
Print Page
COMPUTER INPUT
This projector can automatically tune to the display signals of most personal computers. However, some computers employ
special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this
projector. If this happens, the projector cannot reproduce a proper image and the image may be displayed as a flickering
picture, a non-synchronized picture, a non-centered picture, or a skewed picture.
This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those special signal
formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables
you to recall the setting for a specific computer whenever you use it.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT button to move the red
frame pointer to the PC ADJUST Menu icon.
2
Press the POINT DOWN button to move the red frame pointer to
the item that you want to adjust and then press the SET button.
The adjustment dialog box will appear. Press the POINT
LEFT/RIGHT button to adjust the value.
Fine sync
Adjusts an image as necessary to eliminate flicker from the display.
Press the POINT LEFT/RIGHT button to adjust the value.(From 0 to
31.)
Total dots
The number of total horizontal dots in your picture. Press the POINT
LEFT/RIGHT button(s) and adjust number to match your PC image.
Horizontal
Adjusts the horizontal picture position.
LEFT/RIGHT button(s) to adjust the position.
Vertical
Adjusts the vertical picture position. Press the POINT LEFT/RIGHT
button(s) to adjust the position.
Current mode
Press the SET button to show the information of your computer.
Clamp
Adjusts the clamp level. When the image has a dark bar(s), try this
adjustment.
26
MANUAL PC ADJUSTMENT
Press the POINT
PC ADJUST MENU
Move the pointer to the item and press the
SET button.
Selected Mode
Press the POINT LEFT/RIGHT
button to adjust the value.
Press the SET button at this icon to
adjust "Clamp," "Display area (H/V)" or
set "Full screen."
Current mode
Press the SET button at the
Current mode icon to show
the information of your
computer.
PC ADJUST Menu icon
Shows status
(Stored / Free) of the
selected Mode.