Canon LV-5220 - Multimedia Projector SVGA Functional Specification - Page 14
Browse online or download pdf Functional Specification for Projector Canon LV-5220 - Multimedia Projector SVGA. Canon LV-5220 - Multimedia Projector SVGA 42 pages. Multimedia projectors
Also for Canon LV-5220 - Multimedia Projector SVGA: Functional Specification (20 pages), Specifications (6 pages)
Print Page
Expand Serial Command Functional Specification
8.4.5. CF_SHARP Command
Command
"CF_SHARP_%1" [CR]
"000 – 015" ------------ Directly select the Sharpness setting value
%1
"UP" --------------------- Sharpness setting value +1
"DN" --------------------- Sharpness setting value -1
Set the user control Sharpness value.
The value set by the command will not be saved to the Projector. Therefore, when
Details
AC Power Off the Projector, the value will return to the original setting. (For
Standby mode, this value stays)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable
8.4.6. CF_GAMMA Command
Command
"CF_GAMMA_%1" [CR]
"000 – 015" ------------ Directly select the Gamma setting value
%1
"UP" --------------------- Gamma setting value +1
"DN" --------------------- Gamma setting value -1
Set the user control Gamma value.
The value set by the command will not be saved to the Projector. Therefore, when
Details
AC Power Off the Projector, the value will return to the original setting. (For
Standby mode, this value stays)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable
8.4.7. CF_WBAL- Command
Command
"CF_WBAL-%1_%2" [CR]
"R" -------------------- Red
%1
"G" -------------------- Green
"B" -------------------- Blue
"000 – 063" ------- Directly select color value by White Balance %1 determination
%2
"UP" ---------------- Color value for White Balance %1 determination +1
"DN" ---------------- Color value for White Balance %1 determination -1
Set the user control value by White Balance %1 determination.
The value set by the command will not be saved to the Projector. Therefore, when
Details
AC Power Off the Projector, the value will return to the original setting. (For
Standby mode, this value stays)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable
8.4.8. CF_COLTEMP Command
Command
"CF_COLTEMP_%1" [CR]
"000" ----------- Xlow
"001" ----------- Low
%1
"002" ----------- Mid
"003" ----------- High
Set the Color Temp.
The value set by the command will not be saved to the Projector. Therefore, when
Details
AC Power Off the Projector, the value will return to the original setting. (For
Standby mode, this value stays)
Only valid when it is in the usual Power On state.
Acceptable
Response
Unacceptable
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page 13 of 41