Canon LV-7215 Specification - Page 23
Browse online or download pdf Specification for Projector Canon LV-7215. Canon LV-7215 47 pages. Mounting hanger for low ceilings
Also for Canon LV-7215: Specification (22 pages), Brochure & Specs (2 pages), (Japanese) Assembly & Installation Manual (8 pages)
Print Page
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
Acceptable
Response
Unacceptable
8.7 Input Control COMMAND
8.7.1
CF_INPUT COMMAND
COMMAND
"CF_INPUT_%1" [CR]
"COMPUTER1"........ Select COMPUTER 1 input
%1
"COMPUTER2"........ COMPUTER 2 input
"VIDEO"........................ VIDEO input
Select Input.(Only valid when it is in the usual Power ON status.)
The Command works as the same as the remote controls's unit "INPUT"
button.
Details
Note1:)
Note2:)The selection of Input-1 is not COMPUTER-1 but Memory card/
Wireless/Network when Option box is installed to Input-1 (COMPUTER1).
Acceptable
Response
Unacceptable
8.7.2
CF_SOURCECOMMAND
COMMAND
"CF_SOURCE_%1" [CR]
%1
Select current input source.
(Only valid when it is in the usual Power ON status.)
When selected Input and specified %1 are not matched, the projector
Details
Note) When the option, MCI BOX is installed to Input-1 (COMPUTER1),
selection for source is invalid.
Acceptable
Response
Unacceptable
"000" [CR]
"101" [CR] ----Input-VIDEO
If
trying
to
Input-2(COMPUTER)to MONITOR Out, the projector returns "101".
"000" [CR]
"%%%" [CR]
"DIGITAL"............Select DVI input
Input=1
"ANALOG"............ .Select ANALOG input 0
"HDCP"....................Select DVI HDCP input
"ANALOG"............Select RGB
Input=2
"YPBPR"................Select Component VIDEO input
"SCART"................ Select Scart input
"AUTO"..................Select VIDEO Auto MODE
Input=3
"VIDEO"................ Select Composite VIDEO input
"S-VIDEO"............ Select S-VIDEO input
returns"101" and does not execute the command.
"000" [CR]
"%%%" [CR]
select
Input-2
TERMINAL
error code "101"
when
setting
Page
23