Canon LV-7215 Specification - Page 27
Browse online or download pdf Specification for Projector Canon LV-7215. Canon LV-7215 47 pages. Mounting hanger for low ceilings
Also for Canon LV-7215: Specification (22 pages), Brochure & Specs (2 pages), (Japanese) Assembly & Installation Manual (8 pages)
Print Page
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.9 Lamp COMMAND
8.9.1
CF_LAMPH COMMAND
COMMAND
"CF_LAMPPH_%1" [CR]
%1
"RST"
Reset total lamp running time. (Only valid when it is in the usual Power ON
Details
status.)
Acceptable
Response
Unacceptable
8.9.2
CF_LAMP MODECOMMAND
COMMAND
"CF_LAMPHMODE_%1" [CR]
"NORMAL"-- Set lamp to NORMAL MODE
%1
"ECO"-------- Set lamp to silent MODE.
"AUTO"------ Set lamp to AUTO MODE
Select lamp MODE. (Only valid when it is in the usual Power ON status.)
Details
The value set is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
Acceptable
Response
Unacceptable
8.10
Sound COMMAND
8.10.1 CF_VOLUMECOMMAND
COMMAND
"CF_VOLUME_%1" [CR]
"000-063"------ Directly set Volume value
%1
"UP"---------------- Volume setting value ＋1.
"DN"---------------- Volume setting value -1.
Control Volume setting value. (Only valid when it is in the usual Power ON
status.)
The same operation as a remote Control's turning up/down the volume.
Details
Also, the Command directly sets the volume value.
When setting volume value like remote Control unit" operation, Sound Mute
ON will be canceled. The setting value will be stored in a projector.
Acceptable
Response
Unacceptable
8.10.2 CF_MUTECOMMAND
COMMAND
"CF_MUTE_%1" [CR]
"ON"------ set Sound Mute to ON
%1
"OFF"---- set Sound Mute to OFF
Control Sound Mute ON/OFF.(Only valid when it is in the usual Power ON
Details
status.)
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
"000" [CR]
"Error Code" [CR]
Page
27