Canon LV-7325U Owner's Manual - Page 27

Browse online or download pdf Owner's Manual for Projector Canon LV-7325U. Canon LV-7325U 48 pages. Canon multimedia projector owner's manual lv-7325u

Print Page

PICTURE IMAGE ADJUSTMENT

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select

IMAGE

and press the SELECT button. Another dialog box

PICTURE IMAGE ADJUSTMENT Menu will appear.

Press the POINT DOWN button and a red-arrow icon will

appear. Move the arrow to the item that you want to change by

pressing the POINT UP/DOWN buttons. To change the value,

press either the POINT RIGHT button or the POINT LEFT

button.

Fine sync.

Adjust the picture as necessary to eliminate flicker from the display.

(From 0 to 255.)

Total dots

The number of the total dots in one horizontal period. Adjust the

number to match your PC image.

White balance (Red / Green / Blue)

Move the arrow to the color that you want to adjust. Press POINT

LEFT button to lighten the color and press POINT RIGHT button to

deepen the color. (From 0 to 63.)

Contrast

Press POINT LEFT button to decrease contrast, and press POINT

RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to darken the image, and press POINT

RIGHT button to brighten the image. (From 0 to 63.)

Each of the keys operates as follow.

Reset

Recalls the data previously adjusted.

Stored

Stores the adjusted data in the memory.

Quit

Closes the PICTURE IMAGE ADJUSTMENT Menu.

NOTE : The Fine sync. and the Total dots cannot be fully adjusted

when "RGB," "HDTV1035i" or "HDTV1080i" is selected on

the SYSTEM MENU (P23 and 26).

The normal picture level is preset on this projector at the factory and

can be restored anytime you press the NORMAL button (located on

the Top Control or on the Remote Control Unit). The "Normal"

display will be displayed on the screen for a few seconds.

ADJUST PICTURE IMAGE MANUALLY

NORMAL FUNCTION

COMPUTER MODE

Close the PICTURE

IMAGE ADJUSTMENT

Menu.

Normal

It indicates the

level of the item.

Move the arrow to

the item and press

POINT RIGHT /

LEFT button.