Canon LV-7325U Owner's Manual - Page 35

Browse online or download pdf Owner's Manual for Projector Canon LV-7325U. Canon LV-7325U 48 pages. Canon multimedia projector owner's manual lv-7325u

Print Page

WRITE DATA INTO THE MEMORY CARD

The data edited by Media Card Imager in the computer can be written to or read from the memory card with the

PC Card drive of your Personal Computer or the PC CARD Slot of this projector.

The data edited by Media Card Imager is written in Bit Map type (BMP) or JPEG type (JPG).

ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR

If your computer doesn't have the PC card writing equipment, the data can be written or read by connecting

with this projector.

NOTE : This operation can be made only by Media Card Imager in the Personal Computer.

Connect the projector to your computer with the Control Cable

for Serial Port (optionally supplied). (Refer to "CONNECTING

COMPUTER" on Page 12, 13.)

Insert the memory card into PC CARD SLOT of the projector.

And then, turn on the projector first and then the computer.

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to select VIEW

and press the SELECT button. Another dialog box VIEW

SETTING menu will appear.

Press POINT DOWN button and a red arrow will appear. Move

the arrow to Card access by pressing POINT UP/DOWN

button. And then press SELECT button. "Ready to access" is

displayed.

Operate Media Card Imager of your computer to write/read the

data in the PC card. (Refer to Owner's Manual of Media Card

Imager for operation.)

NOTE : Connect the projector to the computer with Control Cable

before turning those appliances on.

Do not press any button while read/write operations are in

progress. Those operations are canceled and the data in the

memory card may be damaged.

Connect the projector to the Personal Computer with the

Control Cable for Serial Port (optionally supplied / refer

to page 12, 13).

MCI MODE

Move the arrow to

"Card access" and

press the SELECT

button.