Dorma EM 3000-EW AH Installation Manual - Page 6
Browse online or download pdf Installation Manual for Locks Dorma EM 3000-EW AH. Dorma EM 3000-EW AH 9 pages. Early warning electromagnetic lock
Print Page
G. CAMERA WIRING DIAGRAM
MD
DC
S2
S1
G
motion
power
voice module
detector
Note: 1. System can provides one +9VDC output on "remote B" NC
if JP on the PCB is short.
2. Please short JP and connect Camera positive terminal to
NC on "remote B".
H. VOICE MODULE
LED1
LED2
G
Turn closewisely to
increase the voice.
PB1
PB2
PB3
MIC
There are 3 ways to record the messages to the voice module:
When the Voice Module is in the stage of starting recording, user can record the voice
message by speaking to the microphone on the voice module or by connecting ANA to
computer earphone output and playback the voice message thru such as Windows Media
Player.
The messages can also be recorded by programming the Voice Messages directly to the chip
thru programmer.
GND
9V Camera
+ 9VDC
video
GND
5V
NC
C
NO
video
GND
remote B
Monitor
Connect to HD1 S2/S1/G/5V 4-wire connector
on EW5700 PCB or S2/S2/G/5V termianl blocks
on EW3500 PCB.
Y
B
R
ANA
Connect to computer earphone output.
(No Polarity)
R B
Speaker
Connect to speaker.
or
(No Polarity)
B R
NOTE:
Segment 1/2/3/4 is limited to
4/8/8/10 seconds respectively.
NOTE:
Push PB1/PB2 to increment/decrement
the segment number.
Max. 1W
Speaker
Speaker with
Power Source
Flow Chart for Voice Module
INITIAL
LED1/LED2 ALL OFF
PB3 Pushed ?
Y
LED1 Red/Grn
LED2 OFF/OFF
PB3 Pushed ?
N
N
PB1 or PB2
1
Pushed?
Y
Select Message Segment
LED2 Status
Segment Selected
OFF/OFF
1 <4 Seconds>
Red/OFF
2 <8 Seconds>
OFF/Grn
3 <8 Seconds>
Red/Grn
4 <10 Seconds>
PB1 or PB2
Pushed?
N
PB3 Pushed ?
Y
LED1 OFF/OFF
Segment Confirmed
LED2 indicate the selected segment
Y
LED1 Red/OFF
PB1 Pushed ?
START RECORDING
N
Y
LED1 OFF/Grn
PB2 Pushed ?
PLAYBACK
N
PB3 Pushed ?
Y
Push PB3 to return to the initial.
N
Y
Push PB3 to return to the initial.
NOTE:
Push PB1/PB2 to increment/decrement
the segment number.
Y
N
N