Dormakaba 100 Manual - Page 11

Browse online or download pdf Manual for Door Opening System Dormakaba 100. Dormakaba 100 16 pages.

Print Page
Dormakaba 100 Manual
Mullions
Mullion
Cap
MC822
Removable Mullions
The Mullion is used to adapt a double door opening to two single door openings with Rim Exit Devices. When
the full width of an opening is required, the mullion may be removed.
Key Removable Mullion (KR) – Provides a secure yet quick & easy means of removing the 822 or FL822 Mullion.
The mullion can be reinstalled and locked without the need of the key.
Stock Size – For openings 8'-0" high. For openings less than 8'-0" high the mullion can be cut down. For openings
greater than 8'-0" high using the 822, KR822 or 811 mullions, consult factory.
Finishes –
Mullion
For finish description see page 3.
Base
822, FL822, KR822, FLKR822 Mullion
MB822
U.L. Listed – FL822 and FLKR822 listed for Fire Exit Hardware. For FIRE LABEL RATING Chart see page 15.
Mullion
Mullion – 2" x 3" Steel.
Cap
MC811
Mullion Base – Investment Cast Steel, 2" wide 3-1/2" deep. Furnished with steel anchors for concrete floors.
Interlock – Black Powder Coated Investment Cast Stainless Steel. Furnished standard for FL822 and FLKR822
Mullions. It interlocks the mullion to the Rim Active Case and S300 or S301 strike.
Stabilizers – Black Powder Coated Steel. Stabilizers are furnished standard for FL822 and FLKR822 Mullions.
Mullion Cap Spacer – Minimum width 3-1/2". For 2-1/4" frame spacer specify part No. MCS822.
HC822, HCKR822 Mullion
822, FL822 Mullion Cap – MC822 Investment Cast Steel, 4" wide 3-5/8" deep.
KR822, FLKR822 Key Removable Mullion Cap Assembly – Investment Cast Steel - can be ordered to convert existing
822 or FL822 mullions to Keyed Removable Mullions. Retrofits to the hole pattern of an MC822 Mullion Cap. To order
specify: KMC822 or KMC822F. For wire run information, please consult factory
Cylinder – not furnished standard - Rim Type required. See page 13 for cylinder details.
811 Mullion
Mullion – 2" x 2" Steel Mullion.
Mullion Cap – Cast 4-1/2" wide x 2-5/16", furnished with machine screws for metal frames.
Mullion Base – Cast 2" wide x 2-3/4", furnished with sheet metal screws and plastic anchors.
To Order: Specify Mullion No. Height Finish (e.g. 822 x 8'-0" x 600)
Mullion
Base
MB811
Key Removable
Mullion Cap
KMC822
(Rim Cylinder required)
Interlock
S1447
605
689
695
•
•
•
Mullion Cap Spacer
MCS822
Stabilizer
ST989
Olympian 100, 200, 300 Series
Exit Devices
11