Canor 8588008161760 User Manual - Page 3
Browse online or download pdf User Manual for Amplifier Canor 8588008161760. Canor 8588008161760 7 pages. Integrated tube amplifier
Print PageSafety instructions
Please read before putting the device into operation:
•
Read the instructions - all safety information and instructions should be read before using the amplifier.
•
Keep the user manual - the safety and user instructions manual should be stored for later use.
•
Follow the instructions - all safety and user instructions should be followed.
•
Water and moisture – Virtus I2 amplifier should not be placed near water, for example near bathtubs,
swimming pools, kitchen sinks, etc...
•
Accessories - do not use accessories not recommended by the manufacturer.
•
Placement - do not place a device on an unstable pad. The device may fall, which can cause serious
injuries to children or adults and damage to the device. Use only pads or racks recommended by the
manufacturer or pads sold to dealers with this device. Any placement of the device should be in
accordance with the manufacturer's instructions and only accessories recommended by the manufacturer
should be used.
•
Ventilation - the unit should be placed the way to ensure proper airflow. That means placing the amplifier
on a sofa or upholstered furniture is not allowed. The amplifier may not be covered when in operation as
it would prevent proper airflow around the vent holes of the amplifier.
•
Heat - amplifier must be placed to avoid the heating effect from heat sources, for example, radiators or
stoves, or other heat-producing equipment. The distance from the back wall of the unit may not be less
than 20 cm, and 20 cm above the Virtus I2 may not be any barrier. Alongside the unit should be ensured
20 cm minimum distance from other objects.
•
Power source - the device must be connected only to mains (voltage) for what it was designed for.
•
Power cord - it is necessary to pay particular attention to a power cord. It must be positioned in order to
avoid stepping on it and ensure it is protected against mechanical damage.
•
If you do not use the Virtus I2 amplifier for a longer period you should disconnect the power cord from
the mains supply, or at least turn off the main power switch on the back panel.
•
Objects containing liquid - do not place these objects (vases, flowerpots) in a way there is a risk they can
fall down or overflow and so cause damage to the amplifier.
•
Damages requiring service - equipment should be repaired by qualified service in the event that:
a) power cord is damaged.
b) device dropped into the water or was poured.
c) device was exposed to rain.
d) device works incorrectly.
e) the device fell down on the ground or is otherwise mechanically damaged.
•
Repairs - all repairs must be entrusted to a qualified service.
•
General warning - use the device only in accordance with this user guide.
The manufacturer declines any liability should these safety measures not be observed. To help you avoid an
electric shock, do not expose the amplifier to rain or moisture!
Delivery content
•
Shipping packaging
•
Canor Virtus I2 amplifier
•
Remote Control
•
Power cord
•
Set of precisely selected KT88 tubes
•
Textile gloves
•
TX10 screwdriver / screws
•
Canor Virtus I2 user manual and tubes installation guide
Caution!
The Waste Electrical and Electronic Equipment Directive-Regulation of the European Union 2002/96/EC governs
the issue of separate waste collection.
This device may not be disposed of in unsorted municipal waste. Devolve the appliance into a collection centre
for recycling and disposal of electrical and electronic equipment waste. Correct disposal of waste does not cause
negative impacts on the environment and human health. You will thus contribute to the protection of the
environment.