Canor PH 2.10 User Manual - Page 4
Browse online or download pdf User Manual for Amplifier Canor PH 2.10. Canor PH 2.10 6 pages. Phono tube preamplifier
Print PageCANOR PH 2.10 is a tube phono preamplifier for both MM and MC phono cartridges and is equipped with a
high-quality MC step-up Lundahl transformer. It contains minimum number of amplification steps required to
apply purely passive corrections.
The PH 2.10 is designed with regard to the highest possible audio quality. The overall electrical and mechanical
construction is tailored to achieve this ultimate goal.
- wiring circuitry without any global feedback
- PCB`s utilize our premium CMT ™ technology
- absolute selection and tubes matching with above-average parameters
- vacuum-impregnated transformer core
- transformer potted in a special anti-vibration compound
- hight variability of resistances and capacitances settings for all types of phono cartridges
FRONT PANEL
POWER – turning on and off the preamplifier.
MUTE – pressing this button results in an instant muting of the volume. Subsequent pressing results in default
volume.
DIMM -sets the display brightness in six steps whereby 0 is a turned off display, and 5 is maximum brightness.
After turning on, the display brightness level is 3 and by repeated pressing or holding the button, brightness
lowers to values 2,1,0 and continues to rise until maximum brightness (5) is reached, and repeatedly lowers until
display is turned off. In state of a turned off display during operating the device with function keys the display
lights up to brightness 2,and after afew seconds the display turns off again.
MM – to use with Moving Magnet cartridges. Gain: 46dB
Available MM loads: 50pF , 150pF , 270pF , 370pF , 520pF , 620pF , 740pF and 840pF.
C – this button will set the loading capacity for Moving Magnet cartridge (MM input) in steps: 50pF to 840pF.
MC – to use with Moving Coil cartridges. Gain: 70dB
Available MC resistance: 10R , 20R , 40R , 80R , 150R , 300R , 600R , 1200R.
R – this button will set loading resistance for Moving Coil cartridge (MC input) in steps: 10R to 1200R.
Main Rotary Knob = adjusting loads and resistence for dedicated input. Replaces the C / R buttons.
European Community Directives
This product is designed and manufactured in order to comply with existing laws of the European Community.
This product is certified by testing laboratory and bears the CE mark.