Bolt Cyclone User Manual - Page 9

Browse online or download pdf User Manual for Battery Pack Bolt Cyclone. Bolt Cyclone 20 pages.

Print Page

FULL

75%

STATUS

CHARGE

50%

25%

Connecting Your Cyclone to Your Flash

You can use the Cyclone to power a wide range of flash units. To connect, you must use a compatible

connection cable. Cables sold by some flash and battery pack manufacturers are interchangeable with Bolt

cables, but other flash brands use a different connector type. Make sure you select the right one.

Important! Load your flash unit with its standard batteries before connecting it to the Cyclone.

Most compatible flash units require the standard batteries to be installed in order to power the computer

functions that allow the flash to work.

You may need to set your flash unit to recycle by drawing power only from the Cyclone to avoid draining the

Battery LED 1 on: 25% or lower charge level

Battery LEDs 1-2 on: 25%-50% charge level

Battery LEDs 1-3 on: 50%-75% charge level

Battery LEDs 1-4 on: 75% or higher charge level

Connecting Your Cyclone