Dormakaba Muto Premium XL120 Supplemental Instructions - Page 3
Browse online or download pdf Supplemental Instructions for Door Opening System Dormakaba Muto Premium XL120. Dormakaba Muto Premium XL120 7 pages.
Also for Dormakaba Muto Premium XL120: Installation Instructions Manual (13 pages)
Print Page
dormakaba MUTO XL150/80/120/L80 Wood Door Mount Only
Installation Instructions
1 Technical specifications
1.1
Overview
These instructions are for installation of MUTO
PREMIUM sliding door system XL150/80/120/L80 for
wood doors for the following mounting and style
versions:
1. Ceiling mount
General information
1.1.1
•
dormakaba glass hardware is not suitable for
application in rooms where chemicals (e.g. chlorine)
are used as indoor swimming pools, saunas or
salt-water pools.
•
Never move sliding panels faster than walking
speed and always stop the door manually before it
reaches end position.
•
Do not slide doors with excessive force. Install
limiting stop to prevent door from opening too far.
Intended use
1.1.2
•
For sliding door in dry indoor areas only
•
For manual slowly opening and closing only
1.1.3
Door requirements and fittings
•
The substructure/wall must be able to bear
permanent loads and be level (max. tolerance:
1/16" [2] per 39" [1m]).
•
Fasteners must be sufficiently dimensioned for the
substructure/wall and weight of the door.
•
When adjusting door components, always stick to
the required clearance for the respective
hardware.
1.1.4
Safety instructions
•
Installation requires two people.
•
Only properly qualified and specially trained staff
are authorized to mount dormakaba glass
hardware.
1.2
Specifications - technical data
Single Door
XL150
Ceiling
Door leaf
≤330lbs
mount
weight
[≤150]
lbs [kg] *
* Including weight of auxiliary hardware.
MUTO Premium
1.1.5
1.1.6
•
•
•
•
•
•
•
1.1.7
Disposal in accordance with local, state and national
regulations.
XL80
XL120
L80
≤176lbs
≤264lbs
≤176lbs
[≤80]
[≤120]
[≤80]
936053
Symbols used - Safety/Installation
CAUTION
Mounting components must meet the
requirements of substructure/wall and door
weight. Please read the technical information
for fittings.
WARNING
TIPS AND RECOMMENDATIONS
Information note
CLOSING EDGE
Maintenance, care, repair
Immediately replace damaged parts.
Always use original dormakaba parts.
Clean clamping area with alcohol-based standard
commercial cleaning agent before mounting the
glass hardware.
Use a damp clothe for occasional cleaning,
especially the track.
Always use silicone - and oil-free cleaners (e.g.
acetone).
Check door hardware at regular intervals for
proper positioning and smooth operation and
correct adjustment.
High traffic door systems require inspection by
properly qualified staff (specialized companies or
installation firms.)
Disposal
Double Door
XL150
XL80
2 x ≤330lbs
2 x ≤176lbs
[2 x ≤150]
[2 x ≤80]
Technical specifications
XL120
L80
2 x ≤264lbs
2 x ≤176lbs
[2 x ≤120]
[2 x ≤80]
10-2021
3