Akyga AK-CA-73 User Manual - Page 2

Browse online or download pdf User Manual for Controller Akyga AK-CA-73. Akyga AK-CA-73 6 pages.

Print Page

AK-CA-73 - user manual

The RoHS mark on the product is the manufacturer's declaration that the marked product meets

the requirements of the EU Restriction of Hazardous Substances (2002/95/EC) directive, which

aims to reduce the amount of hazardous substances penetrating into the environment from

electrical and electronic waste.

The device is intended only for domestic use, indoors.

Safety Precautions

Connecting computer components whose demanded power is greather than power of the controller,

can cause damage (burn) of controller.

The controller should work in internal conditions that do not cause contact with water and direct

sunlight.

During operation, the controller should be located in a designated housing.

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet. Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the controller or devices connected to it, abstain from touching

contacts, wires and electonic circuits. The user's contact with electronic components should be

kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

Keep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

The product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

If the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

Take account of the user manual for other devices connected to the adapter.

Product and power cord should not be touched with moist or wet hands under no

circumstances.

Short-circuiting the current connection is prohibited.

Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or

mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away

from heat sources (such as stoves, radiators, fireplaces).

Before connecting the adapter to the power supply, make sure that the power of the adapter is

sufficient for the components in the computer.

It is not allowed to put any objects inside the controller.

The controller is connected to the power by plugging it into the Molex connector of an ATX

power supply unit providing 5 V/12 V DC.

p. 2