Cansec H1000 Installation Manual - Page 15

Browse online or download pdf Installation Manual for Controller Cansec H1000. Cansec H1000 20 pages. Elevator control

Print Page

Host Communication Wiring

H1000 Version 1.1 controllers are equipped with two RS485 connectors (see image below) to

allow easy connection of new panels. This eliminates the need to connect 2 wires into one

connector.

The 2-wire RS-485 connections are A and B. The shield wire should be connected to GND.

RS-485 Communication Port (H1000 Version 1.1)

H1000 Version 1.0 controllers are equipped with one RS485 connector. Two wires have to be

connected into one connector for the next added panel.

H1000 Elevator Control

Page 15 of 20

Installation Guide

October 2015 • Rev. 1.7