Cansec SmartLock UltraLite Plus Installation Manual - Page 14
Browse online or download pdf Installation Manual for IP Access Controllers Cansec SmartLock UltraLite Plus. Cansec SmartLock UltraLite Plus 16 pages.
Print Page
Troubleshooting
The SmartLock UltraLite Plus uses a series of ON/OFF tones (beeps) to indicate
operational status to the user. These beeps can be used for troubleshooting.
NOTE: The UltraLite Plus controller emits two types of beeps: high (2,300 Hz)
and low (675 Hz).
Condition
Power Up
Real-Time Clock
Failure
Access Granted
Access Denied
Door-Held-Open
Programming
Successful
Programming
Unsuccessful
Data Transfer
® SmartLock is a registered trademark of Cansec Systems, Ltd.
® iButton is a registered trademark of Maxim Integrated Products, Inc.
Time (ms = millisecond)
100 ms ON
150 ms ON
150 ms OFF
130 ms ON
first beep: 130 ms ON then 20 ms OFF
second beep: 130 ms ON then OFF
Continuous tone
transfer start: 1 s ON at 2,300 Hz (high beep).
during transfer: 500 ms ON and 500 ms OFF.
transfer end: 2 s ON at 675 Hz (low beep).
start: 1 s ON at 2,300 Hz (high beep)
error: 130 ms ON and 20 ms OFF
500 ms ON
500 ms OFF
®
SmartLock
UltraLite Plus
Installation Manual
Mode
Single Beep
Continuous
Beeps
Single Beep
Two Beeps
Continuous
Beep
Low Beep at
End
Four Beeps
Continuous
Beeps
Page 14 of 16
Oct 2013 • Rev. 1.6