Cansec P-620-HA Installation Instructions Manual - Page 7
Browse online or download pdf Installation Instructions Manual for Card Reader Cansec P-620-HA. Cansec P-620-HA 14 pages. Canprox proximity/keypad reader
Print Page
- 1. Table of Contents
- 2. Specifications
- 3. Introduction
- 4. Wall Mounting
- 5. Wiring - Cansec Controllers
- 6. Wiring - 3 Rd Party Controllers
- 7. Programming
- 7. P-640-HA & P-620-HA (26-Bit Wiegand Output)
- 7. P-640-HA37 & P-620-HA37 (Cansec 37-Bit Wiegand Output)
- 8. Proximity/Keypad Reader Usage
- 9. Card + PIN Interface Module - Optional
- 9. Card + PIN Usage
- 10. Reader/Keypad Troubleshooting
- 11. Appendix
Wiring - Cansec Controllers
For illustration purposes only. Pin placement is not in order as shown
Important:
and does not match the layout of many Cansec controllers. Please refer to the
controller installation manual for the pin layout and match up each wire to the
corresponding pin. E.g. Power wire – Power pin, Ground wire – Ground pin etc...
Wiring - 3
Party Controllers
rd
Not used with Cansec
Controllers. Trim off.
Ensure no contact to
other wires.
CanProx Proximity/Keypad Reader
Installation Instructions
Cansec Controller
Page 7 of 14
August 2018 • Rev. 1.6