Boltek EFM-INV2 Installation Instructions Manual - Page 6

Browse online or download pdf Installation Instructions Manual for Racks & Stands Boltek EFM-INV2. Boltek EFM-INV2 13 pages. Inverting mounting kit

Print Page
10/15/2020
Assembling the pole mount bracket
Remove nuts and washers from the two U-Bolts and place around inverted mast. Secure bolts
to bracket as shown below
Open hose clamps, and hold bracket against pole. Place hose clamps through bracket and
tighten around pole or tripod mast. Recommended pole size is between 2.5" and 4" outer
diameter. If a larger pole is used, bigger hose clamps can be purchased at a local hardware
store.
(C) 2020 BOLTEK CORP
EFM-INV_Instruction_1.3