Cansec Via Lock2 Installation Manual - Page 2
Browse online or download pdf Installation Manual for Switch Cansec Via Lock2. Cansec Via Lock2 10 pages.
Print PageTable of Contents
Introduction .......................................................................................................................................... 2
KEY FEATURES .............................................................................................................................................. .2
Typical Configuration .......................................................................................................................... 3
Specifications ...................................................................................................................................... 3
Configure Via Hub ............................................................................................................................... 4
DIP SWITCHES ............................................................................................................................................... .4
Via Hub Wiring ..................................................................................................................................... 9
Wiring SmartLock Pro Plus ...............................................................................................................10
© Copyright 2016 Cansec Systems Ltd.
Introduction
Cansec's Via Universal Wireless Locks communicate wirelessly to a Via Hub which can be located
up to 70/170 ft (21/52 m) away in a typical office environment. Each Hub can support two Via
Locks.
Wiegand data is sent wirelessly to the Via Hub, which in turn sends the data to a Wiegand reader
port on the associated access control panel for verification. If the lock relay operates, indicating that
access is granted, the Hub will send a wireless unlock command to the reader at which the card was
presented.
KEY FEATURES
• Configure in less than 5 minutes
• Works with ANY access control panel
• Up to 70/170 ft (21/52 m) range (selectable via DIP switch)
• Built-in self diagnostics
• Via Universal Hub supports 2 locks
Via Hub
Configuration Manual
Page
2
of
10
July 2017 • Rev. 1.1