CANTERBURY OFFICINA NICOLAZZI Z1459 Manual - Page 3

Browse online or download pdf Manual for Plumbing Product CANTERBURY OFFICINA NICOLAZZI Z1459. CANTERBURY OFFICINA NICOLAZZI Z1459 10 pages. Two hole bridge sink mixer

Print Page
Installation Instructions
Preparation
❶
Flush out the pipework to remove any foreign matter.
The hot supply should be on the left when viewed from
the front of the fitting.
Measure and cut tap holes with spacing of 203 mm,
centre to centre on the wash basin. Two holes are
required for the tap set.
❷
Tap cut out hole sizes : Maximum 32mm diameter.
Under side clearance : Maximum 90mm
❸
Insert the tap B, into work top mounting
holes.
Insure o-ring A, is located between tap base
and worktop surface.
Further information Phone (03) 9761 4603
3
Model : Z1459
Continue.......