Advance acoustic SC100 Operating Manuallines
Browse online or download pdf Operating Manuallines for Scrubber Advance acoustic SC100. Advance acoustic SC100 2 pages.
Also for Advance acoustic SC100: Operating Manuallines (2 pages)
Print PageATTENTION! Do not use the machine before you have read and understood the Instructions for Use Manual.
1. Release the handle to remove the
2. Fill the solution tank with clean
tank assembly.
6. Press the black pedal to put the
7. Press the start/stop button to start
machine in working position.
11. The red LED blinks when the
12. To use the manual suction hose, press
machine is getting low on solution
and has a fixed light when empty.
Empty the recovery tank and
refill the solution tank to continue
working.
16. Check and clean the solution and
17. Remove the squeegee bars.
vacuum filter regularly.
(*)
ALWAYS FOLLOW THE DETERGENT DOSING RECOMMENDATION ON THE LABEL OF THE CHEMICAL PRODUCT USED.
(**) THE MANUAL SUCTION HOSE IS INCLUDED ACCESSORY ONLY FOR THE FULL PACKAGE VERSION; FOR THE BASIC VERSION IS AN OPTION.
9435 Winnetka Avenue North
240 Superior Boulevard
Brooklyn Park, MN 55445
Mississauga, Ontario, Canada L5T 2L2
www.advance-us.com
www.nilfisk-advance.ca
Phone 800-850-5559
Phone 800-668-8400
Fax 800-989-6566
Fax 800-263-5111
3. The tank cap can be used for
water, not to exceed 100° F.
dosing the detergent. One full cap
is 30 ml giving 1% detergent of the
0.8 gal (3 L) tank capacity. (*)
8. Press one of the solution buttons,
the machine.
according to the type of cleaning to
be performed:
1 drop - normal cleaning
2 drop - heavy duty cleaning
When finished using
13. Park the machine in the upright
the main button to start the machine
in upright position. Turn the hose
connection to ON and use the suction
tube. When done turn hose connection
to OFF. (**)
18. Remove the cylindrical brush by
OPERATING GUIDELINES
SC100
™
4. Connect the power plug to an
electrical socket.
9. Move the machine with the handle
and start cleaning the floor.
14. Disconnect the power plug from
position.
the electrical socket and rewind
Turn off the machine by pressing
the cord starting at the machine
the start/stop button.
and place it in the cord holder.
Press the main switch to "0".
19. Clean the squeegee bars and
the cylindrical brush with water.
turning the side knob clockwise.
Check for wear and replace when
necessary.
5. Turn on the machine with the main
switch to "I".
10. For double scrubbing, flip the
pedal to lift/lower squeegees.
15. Empty the recovery and solution
tank. Clean them with water.
20. Wipe down the machine using a
damp cloth, and where needed
use a neutral cleaning product.
Then store the machine in a clean
and dry place.