BATTERIES PLUS X2POWER SLC10005A Instruction Manual - Page 5

Browse online or download pdf Instruction Manual for Battery Charger BATTERIES PLUS X2POWER SLC10005A. BATTERIES PLUS X2POWER SLC10005A 17 pages. Automatic battery charger

Print Page
MOUNTING
x4
AUTOMATIC BATTERY CHARGER
7.5A
LOCATION
Locate the charger as far away from the battery as possible. Do not place the charger directly above
the battery as gases from battery will corrode and damage charger. Do not allow battery acid to come
in contact with charger. Do not operate the charger in a closed-in area or an area with restricted
ventilation. Do not set battery on top of charger.
#6 Self Tapping Screws
(Not Included)
25%
TM
NORMAL
COLD / AGM
NORMAL
12V 7.5A
24V
@
STAND BY
POWER
ADVANCED
SUPPLY
AGM
LITHIUM
12V 24V
OR
13.6V 12V 12.8V
100%
50%
75%
COLD / AGM
MODE
3.75A
@
RECOVER
12V
The SLC10005A has
four (4) external holes
for mounting. Mount
the charger in a desired
location with #6 self-drill
screws. Make sure there
are no obstructions
behind the mounting
surface. The DC cable
length from the charger,
with the clamp or
eyelet, is approximately
23-inches (584.2mm).
Allow for 12-inches
(340mm) of slack
between connections.