Daewoo electricals AVS1347 User Manual - Page 3

Browse online or download pdf User Manual for Speakers Daewoo electricals AVS1347. Daewoo electricals AVS1347 5 pages. Aluminium bluetooth cylinder speaker

Print Page

LED Indicator Modes

• Charging: LED illuminates red.

• Battery Fully Charged: LED extinguished (when powered off).

• Pairing Mode: LED flashes quickly blue.

• Connected: LED illuminates blue.

• Playing Music: LED flashes slowly blue.

Charging Your Cylinder Speaker

Before first using your Cylinder Speaker ensure it is fully charged as follows:

1. Insert the Micro USB plug of the USB to Micro USB Charging Cable into the Micro USB

Charging Port on the Cylinder Speaker.

2. Insert the large USB plug into a suitable USB charger rated to at least 1 Amp. (most chargers are

rated 1 Amp or above).

3. Whilst the Speaker is on charge, the LED Indicator will glow red, once the internal battery is

fully charged the LED will go out.

NB Charging time will take approximately 2-3 hours – remove the charging cable once the

speaker is fully charged.

Powering Up Your Cylinder Speaker

1. Power On: Move the ON/OFF Switch to the right 'ON' position and the LED Indicator will flash

Blue and a chiming tone will be heard showing the speaker is ready to pair.

2. Power Off: Move the ON/OFF Switch to the left 'OFF' position to switch the speaker off.

Pairing Your Cylinder Speaker

1. Power up the speaker as described above and the LED Indicator will quickly flash Blue.

2. A chiming tone will be heard to indicate the speaker is powering up and ready to pair.

3. Activate your Bluetooth search mode on your media device and search for 'AVS1345' in the list

shown on your Bluetooth device. Select AVS1345 from the search results and the speaker will now

pair with your device.

4. Once the two are paired successfully you will hear another chiming tone to confirm pairing and the

LED will now illuminate a steady blue colour.

NB The speaker will reconnect automatically after power up if your device has previously paired

with the headphones and the pairing process may not be needed.

Playing Music via Bluetooth after Pairing

1. Press the Speaker Control in to start playing music, press the control in again to pause playing

music.

2. Slide and hold the Speaker Control to the right to increase the volume level.*

3. Slide and hold the Speaker Control to the left to decrease the volume level.

4. Briefly slide the Speaker Control to the right to skip to the next music track.

5. Briefly slide the Speaker Control to the left to skip back to the previous music track.

NB whilst playing music, the LED Indicator will flash slowly

Handling Telephone Calls

Answering a Call

A call coming in will mute (cut) the music you are listening to.