dafi IPX4 Instruction For Attachment And Use - Page 3

Browse online or download pdf Instruction For Attachment And Use for Water Heater dafi IPX4. dafi IPX4 12 pages. Electric a flow heater with an open outlet water
Also for dafi IPX4: Operating Instructions Manual (13 pages)

dafi IPX4 Instruction For Attachment And Use
3. Construction of the water heater
DAFI heater consists of a heating block, mounted to the assembly of
water. Team Water is built from the base of having connections inflow of
cold and warm water outflow. Inside the heater is heating block, and in
the water channels of the heating element (heating coil) and elements for
the power supply. The device is enclosed in the housing.
4. Principle of operation
After opening the hot water tap, flowing water will activate the flow
switch (power supply to the heating element) and heating water flow
directed to the battery. The water temperature depends on the pressure
and temperature of the water flowing into the furnace. Closing the valve
turns off the hot water flow switch (interruption of power supply to the
heating element). Adjust the temperature of the water flowing out of the
heater can only be achieved by slowly closing or opening hot water tap in
the field of flow from the hot water heater.
A smaller flow of water to a higher temperature.
The temperature of the hot
water flowing from the heater to
adjust by slowly closing or opening
The equipment heater:
Set for mounting the battery: heater, faucet
spout with aerator (fig. 1a) key mounting junction
box (available as an additional element), operating
instructions, a list of service centers, warranty card.
Set for mounting of connection: heater, shut
off valve, co ectio ½" (fig. 1b) key
mounting junction box (available as an
additional element), operating instructions,
a list of service centers, warranty card.
Set for mounting with three-way tap:
Heater, reductio
(available as an additional element), junction box (available as an
additional element), user's manual, a list of service centers,
warranty card. For heaters with a capacity of 3700 W is added
aerator and reduction aerator M 22x1 /24x1 M.
hot water tap
ipples M 8 /½"; Ke
a)
ou ti g valve
b)
rys
fig 1