Asus MB166C User Manual - Page 26

Browse online or download pdf User Manual for Monitor Asus MB166C. Asus MB166C 27 pages. Portable usb monitor

Print Page

After connecting with the

USB Type-C source device,

the power LED lights

continuously blinking or

showing ASUS logo repeatly

*1: White color background will consume higher power, so it's better to use

white color background to test the power limit from source USB Type-C

device.

*2: If MB166C does not re-start when adjusting to value 100, that means

source USB Type-C device has sufficient power supply.

ASUS USB Type-C Monitor MB166C

• Insufficient power supply from source USB

Type-C devices. Please follow below steps:

• Press the left function key, and then connect

the USB Type-C cable. This operation will

enable built-in safe mode. After displaying

ASUS logo, please release the Blue Light

Filter button. After ASUS Logo disappearing,

there is "safe mode" message OSD showing

up. Once "safe mode" message OSD

disappears, please set background color to

white image or nearly white image (*1).

• Press MENU button, main menu OSD is

showing. The upper left corner of the OSD will

display small red-colored font "S", indicating it

is now in safe mode. Enter brightness setup,

press the up key to tune up brightness. During

the process, please note down brightness

value "Y" up until MB166C re-start.(*2). For

example, if brightness value shows "70" and

MB166C restarts when adjusting to "71",

"70" is the "Y" value to note down and is the

highest brightness value for the connecting

USB-C source device.

• Press MENU button, main menu OSD is

showing. The upper left corner still indicate

"S" as safe mode. Adjust the OSD brightness

value to "Y"

• Close the OSD and press Low Blue Low Filter

hot key for 5 seconds to turn off safe mode.

• Complete.

3-13