Asus MM17 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Monitor Asus MM17. Asus MM17 2 pages.

Print Page
Operating Instructions
Press the power button to turn the LCD
bezel. By changing these settings, the picture can be adjusted to your personal preferences.
•
The power cord should be connected.
•
Connect the signal cable from the LCD Monitor to
•
Press the power button to turn on the Monitor. The power LED indicator will light up.
1.
SPLENDID™ Button :
•
Hotkey for switching between 5 advanced video preset modes (Scenery Mode, Standard Mode, Theater
Mode, Game Mode, Night Mode) with SPLENDID™ Video Enhancement Technology.
•
Automatically adjust the image to its optimized position, clock, and phase by pressing the button for 2
seconds.
•
Exit the OSD menu or go back to the previous menu as the OSD menu is activated.
－/
2.
Button :
•
Activate Volume (MM17T)/ Contrast (MM17D) adjustment menu.
•
Decrease the level of the function selected or move to the previous function as the OSD menu is
activated.
3.
Power Button / Power LED Indicator:
•
Switch the Monitor on or off.
•
LED lights blue(MM17T)/green(MM17D): normal operation mode.
•
LED lights amber: power saving mode.
•
LED is off: power off mode.
＋/
4.
Button :
•
Activate Brightness adjustment menu.
•
Increase the level of the function selected or move to the next function as the OSD menu is activated.
5.
Menu Button :
•
Activate the OSD (On-Screen Display) main menu.
•
Enter/select the icon(function) highlighted as the OSD menu is activated.
Troubleshooting
No Power - The monitor's power indicator is off.
Make sure the monitor power cord is fully inserted in the monitor's power socket and the electrical outlet.
•
Test the electrical outlet by plugging in a working electrical device such as a lamp.
•
•
Try another power cord on the monitor. You can use the computer's power cord to perform this test.
No Video - The monitor's power LED indicator is on but there is no image on the screen.
•
Ensure that the signal cable is properly connected the monitor and the computer.
•
Ensure that the computer is on and functioning properly.
Turn off the monitor and check the signal cable pins. Make sure none of the pins are bent.
•
Blurry/Fuzzy Picture.
Press the SPLENDID™ Button for 2 seconds to automatically adjust the image.
•
Adjust the Phase and Clock settings via OSD.
•
•
Turn off the monitor and check the signal cable pins. Make sure none of the pins are bent.
Too Dark/ Light Picture.
•
Adjust the Contrast and Brightness settings via OSD..
No Sound or Sound Is Low (MM17T only).
•
Ensure that the audio cable is properly connected the monitor and the computer
Ensure the computer sound card driver is well installed and activated.
•
Adjust the volume settings of both your monitor and computer.
•
2
Monitor
Quick Setup Guide
Monitor
on or off. The other control buttons are located on the front
your
computer.