Asus ROG SWIFT 360HZ PG27AQN User Manual - Page 18
Browse online or download pdf User Manual for Monitor Asus ROG SWIFT 360HZ PG27AQN. Asus ROG SWIFT 360HZ PG27AQN 33 pages.
Print Page
3.1.2
OSD function introduction
1.
G-SYNC
G-SYNC®
Processor
Gaming
Image
Color
Input Select
•
NVIDIA Reflex Latency Analyzer
You need to position the "Monitoring Rectangle" where there is a near
immediate change in luminance. The faster, the better. This is most often the
muzzle flash, but can be a scope change or other instantaneous movement.
This will vary by your game.
Before using this function, follow below steps to finish the monitor setup:
a.
Plug in Type-B end of the USB cable into the back of the monitor and
plug the other end into your computer.
b.
Plug in the Reflex Latency Analyzer supported mouse at the back of the
monitor into the USB port closest to you when facing the display.
c.
Ensure the monitor is set to G-SYNC Esports mode.
Select On in the G-SYNC
d.
Analyzer > PC + Display Latency menu.
The Reflex Latency Analyzer Monitoring Rectangle will appear in
e.
the center of your screen along with the PC + Display Latency metric
located at the top left corner of the screen.
* PC + Display Latency: Enables or disables the latency analyzer
function. When enabled, the analyzer detects clicks coming from your
mouse and then measures the time it takes for the resulting pixels (i.e.
a gun muzzle flash) to change on screen during gameplay.
* Monitoring Sensitivity: Adjusts the monitoring sensitivity.
* Show Monitoring Rectangle: Displays or hides the monitoring
rectangle. This rectangle specifies which pixels the G-SYNC processor
will sense during a mouse click.
3-2
Processor
®
2560x1440
360 Hz
NVIDIA Reflex Latency Analyzer
Input Select
DisplayPort
Processor > NVIDIA Reflex Latency
®
Mouse
HDR
Analyzer Inactive
OFF
Chapter 3: General Instructions