Dahle 20606 S Operation Manual - Page 4
Browse online or download pdf Operation Manual for Paper Shredder Dahle 20606 S. Dahle 20606 S 4 pages. General office shredders
Also for Dahle 20606 S: Operation Manual (4 pages)
Print Page
http://www.monomachines.com
2 0614 EC
20606 EC
20612 EC
1. ON/OFF is controlled by the green push button (8)
found on top of the shredder.
2. Pressing this button turns the shredder on
and places it in the stand-by mode.
3. Pressing the button again turns the
shredder off.
SHREDDING
20 612 C
20606 S
20606 C
Turn shredder on. Insert paper squarely into
Feed Opening (3). Continue feeding paper into
Feed Opening until the shredding mechanism
begins to draw the paper in. At this point,
allow the paper to feed into shredder on its
own. When shredding is complete, turn
shredder off.
2 0614 EC
20606 EC
20612 EC
Turn shredder on. Insert paper squarely into
Feed Opening (3). A light barrier will auto
matically activate the shredding mechanism.
Continue feeding paper into the Feed Opening
until the shredding mechanism begins to
draw the paper in. At this point, allow the paper
to feed into the shredder on its own. Once the
paper has passed completely through the shredding mechanism, the electronic
controls will automatically stop the machine.
To shred a piece of paper too small to break the light barrier, press the
FORWARD button (7) once to override the auto ON/OFF function. The shredder
will continue to run until the FORWARD button is pressed again.
Microfiche and transparencies can also be shredded in the same manner as
paper, however, you should shred a piece of paper after every 8 or 10 sheets of
plastic. This helps clean plastic particles out of the shredding mechanism.
REMEMBER TO LUBRICATE YOUR SHREDDER ACCORDING TO INSTRUCTIONS
http://www.monomachines.com
2 0630 EC
20634 EC
2 0630 EC
20634 EC
CAPACITY
Capacity is the number of sheets of 8½" x 11" paper that can be shredded at one
time. These figures are approximate and machines may vary slightly due to
various conditions. It is not recommended that you try to run your shredder at
maximum capacity, as this increases the chance of a paper jam.
2060
2060
Model
20 Lb. Bond
2061
20606 S
2061
6 C
2061
6 EC
2063
2 C
2063
2 EC
4 EC
0 EC
4 EC
CLEARING A PAPER JAM
If too many sheets of paper are fed into your shredder at one time, it may cause a
paper jam. Running your shredder at maximum capacity increases the chance of
a paper jam. If a paper jam occurs, it is easy to clear by following these simple
steps:
20 612 C
20606 S
20606 C
1. Turn shredder off using ON/OFF/REVERSE switch (8a).
2. F irmly pull on paper sticking out of Feed Opening while holding
ON/OFF/REVERSE switch in the REVERSE (R) position.
3. After paper has been removed from the Feed Opening, move the
ON/OFF/REVERSE switch back to the ON (I) position.
4. Separate some of the sheets and continue shredding.
2 0614 EC
20606 EC
20612 EC
The Auto-Reverse feature, built into the electronic versions of the General Office
Shredders, helps prevent paper jams. If the Auto-Reverse feature is activated an
audible alarm sounds and the Paper Jam Indicator (6) lights up. If this situation
occurs, follow these simple steps:
1. Remove paper from Feed Opening. The REVERSE button (7a) may be used
if excess paper remains in the Feed Opening. Clear shredding mechanism
by pressing the FORWARD button (7).
2. Separate some of the sheets and continue shredding.
IT IS NOT RECOMMENDED RUNNING SHREDDERS AT MAXIMUM CAPACITY
16 Lb. Bond
32
38
32
38
32
38
14
17
14
17
20
25
7
9
6
8
2 0630 EC
20634 EC