Double K Industries Challengair 2000XL Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Dryer Double K Industries Challengair 2000XL. Double K Industries Challengair 2000XL 4 pages. Animal dryer

Print Page

REQUIRED MAINTENANCE

FILTERS:

(Procedures below must be performed regularly or as needed to protect dryer warranty status.)

FILTER CLEANING: Both the external and internal filters of the CHALLENGAIR 2000XL™

should be kept clean. If the filters become heavily coated with hair or debris, it will reduce

the air output of your dryer and can cause damage to the motor or cause the motor to

overheat.

*Never operate the dryer without all filters in place.

To clean external filter: Vacuum or shake off dirt and hair daily. Filter may be rinsed in

water if necessary. Let filter dry completely before reinstalling on dryer.

To clean the internal motor filter of the CHALLENGAIR 2000XL ™:

Unplug dryer.

Slide off the end cap of the dryer by lifting up on side tabs and pulling off.

Remove the filter from the internal filter housing.

Clean motor filter disk by vacuuming off hair and dirt, or wash filter gently

in cool water. Shake off excess water and allow to air dry completely.

Place the filter back in the filter housing.

Replace dryer end cap until tabs lock in place.

Any maintenance not explained in this manual should be performed by Double K

Industries or an Authorized Service Center. Call Double K Industries for the name of an

Authorized Service Center nearest you. All warranty service must be performed by an

Authorized Service Center (or Double K Industries) to protect your warranty status.

Place screwdriver tip between clip and

plastic brush body. Rotate to separate tab

from brush.

Detail A

Brush

Assembly

Brush

Retainer

Bracket

Brush Retainer

Bracket Screw

Congratulations!

You've just purchased the Double K

produces warm, high velocity air under pressure, to allow you to dry your animal perfectly.

Your new dryer is designed to provide long, reliable service.

Please read this manual carefully and completely before beginning operation of your dryer

and keep in a convenient and safe place for future reference. A warranty card is included with

your dryer and should be filled out completely and mailed to Double K Industries within 30

days of the purchase date of your dryer to validate your warranty. Online registration is

available at www.DoubleKIndustries.com

Your

defects in materials and workmanship. Regular maintenance items such as brushes and filters

are NOT included (see warranty card for complete warranty information). It is also important

to retain your sales receipt as proof of purchase should service ever be needed.

Your

the brushes be changed when they become worn down to prevent damage to your dryer

motor (brushes are maintenance components and are NOT covered under the warranty). We

suggest checking the motor brushes after every 600 hours of dryer use. Please see section on

BRUSHES in this manual for instructions.

A NOTE ABOUT HEAT: Your

CHALLENGAIR 2000XL ™

pushed through the motor and is warmed by the natural heat of the motor that occurs during

operation. This means greater electrical savings and efficiency for you. The dryer will reach its

maximum air temperature after about a minute of operation. (Note: The higher the room

temperature, the warmer the air from the dryer will be.)

ASSEMBLY

To attach hose to dryer: Your dryer hose has a black hose adapter that will screw onto the

hose in a counter-clockwise motion. The adapter with hose attached then fits onto the dryer

with a half-twist motion that locks the adapter onto the dryer.

Flag

Connector

First, place the adapter over the snout of the dryer with the Double K logo facing up, then turn

hose counter-clockwise until the adapter locks in place. The Double K logo should then be

sitting horizontally. To remove hose from adapter: Turn the hose clockwise.

ATTACHMENTS: Your dryer is equipped with one hose, 1 twist-on Airgonomic

Airgonomic

twist counter-clockwise. Twist clockwise to remove. The nozzle handle slides on and off the

nozzle raised track. When attaching or removing the handle, take care to keep fingers away

from the nozzle body toward the handle bottom. To attach nozzle tips, "rock" the attached tip

off, and the new tip on. See Attachment List on page 8.

OPERATION

Switches and Controls:

1. 2-Speed:

2. Variable Speed (optional) - IMPORTANT: Do not use with Power Inverter system.

CHALLENGAIR 2000XL™

CHALLENGAIR 2000XL ™

has a limited two-year warranty covering the unit against

CHALLENGAIR 2000XL ™

has a commutation brush-type motor. It is important that

CHALLENGAIR 2000XL ™

produces heat by a "flow-thru" motor system, meaning the air is

™

nozzle handle, and 3 Airgonomic

Low Speed / Standard Heat - Turn on the top motor switch.

High Speed / High Heat - Turn on both motor switches.

Maximum Output - Turn the dial speed control clockwise to its maximum.

Variable Output - Turn the dial speed control clockwise to desired air output.

Off Position - Turn the dial speed control counter-clockwise until it clicks off.

Forced Air Dryer, which

has no heating element. The

™

nozzle, 1

™

nozzle tips. To attach nozzle to the hose,