Electramax eM-50T User Manual - Page 3

Browse online or download pdf User Manual for Baby Monitor Electramax eM-50T. Electramax eM-50T 6 pages. Wireless colour video and audio baby monitor

Print Page

13.0 CARE AND MAINTENANCE

Keep all parts and accessories out of young children's r each.

Fingerprints or dirt on the lens sur face can adversely affect camera per formance.

Avoid touching the lens surface with your fingers.

Should the lens become dirty, use a soft, dr y cloth to wipe the lens.

Keep the camera dry. Precipitation, humidity, and other liquids contain minerals that will

corrode electronic circuits.

Do not use or store in dusty, dirty places.

Do not store in hot environment. High temperatures can shor ten the life of electronic

devices and warp or melt certain plastics.

Do not store in very cold envir onment. When the system warms up (to its normal temperature),

moisture can form inside the units, which may damage electronic circuitr y.

Do not attempt to open the case. Non-expert handling of the device may damage the system

and will void the guarantee.

Avoid dropping the units or any shocks.

Operate this product using only the power adapters supplied.

Do not overload electrical outlets/extension cords as this can result in fire or electric shocks.

WARNING:

Do remember that you are using public airwaves when you use the system and that

sound and video may be broadcast to other 2.4 GHz receiving devices.

Images & conversations, even from rooms near the camera, may be broadcast. To

protect the privacy of your home, always turn the camera off when not in use.

This product conforms with the essential requirements as described in directive

R&TTE 1999/5/EC and satisfies all the technical regulations applicable to the product

within following standard: Safety (73/23/EEC): EN 60065/1998, EMC (89/336/EEC):

EN 301 489/2001, RF: EN 300 440/2001

14.0 FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide

reasonable protection against harmful inter ference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful inter ference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause har mful interference to radio or

television reception, which can be determined by turning the equipment of f and on, the user

is encouraged to try to cor rect the interfer ence by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment

and receiver. Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Label Compliance Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful inter ference, and

(2) this device must accept any interference r eceived, including interference that may cause

undesired operation.

Note: The manufacturer is not responsible for any radio or TV inter ference

caused by unauthorized modifications to this equipment. Such

modifications could void the user's authority to operate the equipment.

IMPORTANT NOTE

The eM-50T is designed to monitor your baby. It should NOT be considered as a

substitute for adult supervision. Neither is it designed to be used as a medical monitor.

When using this product for monitoring your baby, always ensure you are within

reach of the Parent unit and personally check your baby as necessary.

YOUR eM-50T MONITOR PACK CONTAINS:

1 x Baby Unit - Camera (Transmitter), 1 x Parent Unit - Monitor (Receiver),

1 x A/V (audio/video) cable, 2 x power adapters (9V DC, 300mA for Baby unit;

6V DC, 600mA for Parent unit, 1 x Mounting Plate, 1 set of Fixing screws and Masonr y plugs,

1 x User Manual.

BATTERIES NOT SUPPLIED.

1.0 PRODUCT LAYOUT

1.1 Baby Unit - Camera (Transmitter)

Infrared LEDs.

Lens.

Lens head.

Microphone.

Keyholes.

Battery compar tment.

Power indicator LED.

OFF/ON/NIGHT

(Power OFF/Power ON/Night Vision ON)

Channel selection switch.

(Select the channel by sliding the switch

to the desired channel number.)

Note: You must select the same channel

on the Baby and Parent units.

9V 300mA power adapter plug.

1.2 Parent Unit - Monitor (Receiver)

Voice sensitivity control.

Power/Volume control.

Auto mode (Voice-activated function).

Channel selection button.

(Select the channel you

want by pressing this

button.) Note: You must

select the same channel on

the Baby and Parent units.

Power indicator LED.

Channel indicator LEDs.

Brightness adjustment button.

(7 levels of brightness control.

The power LED will blink when

pressing the (-) or (+) button

to the highest or lowest level.)

Keyholes.

Battery compar tment.

6V 600mA Power adapter plug.

AV output jack (mono sound).

Fig. 1

Fig. 2