Doug Fleenor Design PRESET 10 PORTABLE Owner's Manual - Page 7
Browse online or download pdf Owner's Manual for Recording Equipment Doug Fleenor Design PRESET 10 PORTABLE. Doug Fleenor Design PRESET 10 PORTABLE 11 pages.
Also for Doug Fleenor Design PRESET 10 PORTABLE: Owner's Manual (6 pages)
Print Page
Lockout
Multistation
Buttons
JP6 - Record Lockout – With JP6 removed, the recessed record button on the front
panel will no longer allow the recording of presets. Editing of fade times is also disabled.
With JP6 installed recording and editing of fade times take place as described in the
front interface section.
FRONT INTERFACE
The PRE10ETHER-A has a front interface where the majority of user interaction takes
place. The front interface has buttons and LEDs involving playback, recording, and fade
time. Using the front interface, a user can select an active preset or determine a lockout
condition. The recessed RECORD and FADE TIME buttons require a small blunt object,
such as a paper clip.
PLAYBACK OF PRESETS
The PRE10ETHER-A transmits presets when not locked out. When the PRE10ETHER-
A outputs a preset, an associated green indicator LED will illuminate the button cap. In
STANDARD lockout mode, the PRE10ETHER-A will darken all active preset indicators,
and show only a red indicator LED. In NO LOCKOUT mode, the playback happens all
the time, and the red LED indicates only the receipt of data. When shipped, the
PRE10ETHER-A will have its lockout setting as STANDARD. Whenever one or more of
the indicator LEDs are on, a user can expect playback.
Standard
Single
Radio
Page 7 of 10