Colzer PD223A User Manual - Page 11

Browse online or download pdf User Manual for Dehumidifier Colzer PD223A. Colzer PD223A 20 pages.

Print Page

the digital number turns to statically display the actual room humidity, during which time the

setting will be automatically registered.

· Let the Dehumidifier Run. The dehumidifier will automatically stop when the room humidity

reaches the target RH% or when the water bucket is full.

★ You can also use the SPEED button to change the fan speed to FAST or SLOW. When the fan

speed was set to high, the "FAST" icon will light up. When the fan speed was set to low, the "SLOW"

icon will light up. High fan speed will result in quicker moisture removal.

2) DRY (Laundry Dry) Mode

Press the MODE button until you see the"DRY"icon light up on the display to select DRY-CLOTHES

mode. In the DRY-CLOTHES mode, the dehumidifier will run continuously at high fan speed. Please

note, in the DRY-CLOTHES mode, the HUMIDITY button and the SPEED button are disabled.

How to use the DRY-CLOTHES mode better?

· Hang the clothes in a small room; (maintain a minimum clearance of 40 cm (16 inches) to the air

outlet of the dehumidifier to avoid water dripping into the dehumidifier.)

· Close the windows and doors;

· Run the dehumidifier in the DRY-CLOTHES mode.

The TIMER function enables you to either Delay AUTO-ON or Delay AUTO-OFF the dehumidifier in

the choice from 1 hour to 24 hours.

Setting an AUTO-ON timer: When the dehumidifier is off,

selecting Timer will turn the

dehumidifier on in the hours that will be set.

Setting an AUTO-OFF timer: When

the dehumidifier is on, selecting Timer will turn the

dehumidifier off in the hours that will be set.

Follow the below steps to set the TIMER:

1) Press the TIMER button once, the display will display 00 and flash;

2) Adjust the timer setting by pressing the TIMER button repeatedly to change the delay timer at

1-hour increments, up to 24 hours;

3) After selecting the target timer value, wait for 5 seconds to let the setting be registered

automatically and the digital display turns to display the room humidity percentage level;

4) The control will count down the time remaining (8,7,6, etc.) until the dehumidifier either starts

or stops. After the TIMER setting finishes, pressing the TIMER button again to check the time

remaining.

5) To disable the timer, manually turn on/off the dehumidifier or set the timer at 00.