Baumer GIM500R Manual - Page 28
Browse online or download pdf Manual for Accessories Baumer GIM500R. Baumer GIM500R 29 pages. Inclination sensors
Also for Baumer GIM500R: Manual (20 pages), Manual (13 pages), Assembly Instructions (2 pages)
Print Page
LED status display
3.5
The LED status display is according to DS-303 Part 3 V1.0.0 with some exceptions. The following defined
LED behaviors are overwritten by the application in case of a severe internal error.
CANopen Status LED (Green)
3.5.1
Status LED
Single flash
Blinking
On
Off
CANopen Error LED (Red)
3.5.2
Error LED
Single flash
Off
On
Baumer_GIM500R_CANopen_MA_EN.docx
03.19
State
STOPPED
PREOPERATIONAL
OPERATIONAL
Power off
State
Bus warning
No error
Bus off / Internal Error
28/29
Description
The Device is in STOPPED state
The Device is in the PRE-
OPERATIONAL state
The Device is in the
OPERATIONAL state
The Device is not powered
Description
The CAN controller is not
receiving ACK messages (i.e. no
master)
The Device is in working
condition
The CAN controller is bus off or
an internal error is present.
www.baumer.com