dough Xpress DXP-GF001 Operation Manual - Page 3

Browse online or download pdf Operation Manual for Kitchen Appliances dough Xpress DXP-GF001. dough Xpress DXP-GF001 8 pages. Bread slicer

Print Page

INSTALLATION & SETUP

TO REMOUNT THE BLADES

1. Compress Spring (29) to put the Blades onto the Frames (25) and (26)

one by one.

2. Put Frames (25) and (26) into position and lightly tighten bolts that

screw into (40) that secure Blade Frames, insert the Guide Rod (35) into

Top of Frames. NOTE: MAKE SURE BOLT THAT SECURES GUIDE ROD

(30) IS PROPERLY SEATED IN INDENTATION ON GUIDE ROD, IF NOT

THE GUIDE POD MAY COME LOOSE AND HIT TOP COVER (9)

3. Make sure Blade Frames will travel up and down freely with out hitting

one another, there should be about 1/32 of an inch between Blade Hold-

ing Brackets. Once this is done and Blade Frames don't collide with one

another tighten bolts that screw into part Number (40) to secure bottom of

Blade Frame

4. Reinstall parts Number (7) Tighten the screw (6)

5. Put in Outgoing Chute (10).

6. Turn on Bread Slicer to make sure all parts are secure and no unusual

noises

7. Reinstall Top Cover (9) and turn on unit once again before using to

make sure Guide Rods (33) are not hitting Top Cover (9)

*PARTS LIST ON NEXT PAGE*