Baumer OADM 20I6591 User Manual - Page 26

Browse online or download pdf User Manual for Accessories Baumer OADM 20I6591. Baumer OADM 20I6591 48 pages. Laser distance sensor

Print Page

General notes

Rules for proper usage

Set-up

Installation

Laser safety

• The laser diode installed in the OADM emits visible red laser lights. This laser belongs to the Class 2 laser

standard specified by the IEC 60825-1

• Max. average output power < 1 mW

• Laser radiation, do not stare into beam

• To avoid uncontrolled laser exposure we recommended stopping the beam with a matte object.

• For laser safety reasons, the voltage supply of the sensors must be turned off when the whole system or

the machine is turned off.

• Safety concept information and limiting parameters as published in the sales documentation apply at all

times.

Manual_OADM20x659_DE_EN.doc

04.12.12

This product is a precision device which has been designed for the

detection of objects and parts. It generates and provides measured

values issued as electrical signals for following systems. Unless this

product has not been specifically marked it may not be used in

hazardous areas.

Installation, mounting and adjustment of this product may only be

executed by skilled employees.

Only mounting devices and accessories specifically provided for this

product may be used for installation.

Unused outputs may not be connected. Unused strands of hard-

wired sensors must be isolated. Do not exceed the maximum

permissible bending radius of the cable. Before connecting the

product electrically the system must be powered down. Where

screened cables are mandatory, they have to be used in order to

assure EMI protection. When assembling connectors and screened

cables at customer site the screen of the cable must be linked to the

connector housing via a large contact area.

26/48

Baumer

Frauenfeld, Switzerland