Dahua F Series Quick Start Manual - Page 10

Browse online or download pdf Quick Start Manual for Security Camera Dahua F Series. Dahua F Series 17 pages. Hd ir bullet network camera
Also for Dahua F Series: Quick Start Manual (17 pages), Quick Start Manual (18 pages), Quick Start Manual (17 pages), Quick Start Manual (15 pages), Quick Start Manual (6 pages), Quick Start Manual (16 pages), Quick Start Manual (18 pages), Quick Start Manual (7 pages), Quick Start Manual (16 pages), Quick Start Manual (18 pages), Quick Start Manual (12 pages), Quick Start Manual (16 pages), Quick Start Manual (12 pages), Quick Start Manual (13 pages), Quick Start Manual (18 pages), Quick Start Manual (15 pages)

Print Page

Dahua Panoramic + PTZ Network Camera Quick Start Guide

Please implement the step when it needs to use Micro SD card for data storage.

Find the Micro SD card installation slot in the location shown in Figure 3-2, adjust the

direction of Micro SD card well and insert it into the slot and complete installation.

Step 3 Install back the device enclosure and use screwdriver to tighten it firmly and

install the device decoration cover back in position.

Step 4 Fix the installation bracket on the mounting surface.

Mark the installation hole sites on the surface according to the installation

holes of the device pedestal and dig holes on the surface, insert the

expansion bolts into the holes you just dug.

Pull the device external cable (network cable without crystal connector) out

from the installation bracket.

Align the installation holes of the bracket pedestal with the installation hole

sites on the surface, and then insert the expansion bolts into the bracket

pedestal and lock them firmly.

Step 5 Install adapter block. Pull the device external cable through the adapter block

and twist it into the installation bracket, then use the locking screw to tighten it

firmly.

Step 6 Connect device cable and put it back into the installation bracket.

Install anti-drop rope.

 When the device adopts wall-mounted installation mode, it needs to

hang one end of both anti-drop ropes on the hook of the device bottom,

and then hang the other end of both anti-drop ropes on the two hooks

of the installation bracket.

 When the device adopts pendant installation mode, it needs to hang

one end of both anti-drop ropes on the hook of the device bottom, and

then hang the other end of both anti-drop ropes on the two hooks of the

adapter block.

Figure 3-2