Dahua F Series Quick Start Manual - Page 11

Browse online or download pdf Quick Start Manual for Security Camera Dahua F Series. Dahua F Series 18 pages. Hd ir bullet network camera
Also for Dahua F Series: Quick Start Manual (17 pages), Quick Start Manual (18 pages), Quick Start Manual (17 pages), Quick Start Manual (15 pages), Quick Start Manual (6 pages), Quick Start Manual (16 pages), Quick Start Manual (18 pages), Quick Start Manual (7 pages), Quick Start Manual (17 pages), Quick Start Manual (16 pages), Quick Start Manual (18 pages), Quick Start Manual (12 pages), Quick Start Manual (16 pages), Quick Start Manual (12 pages), Quick Start Manual (13 pages), Quick Start Manual (15 pages)

Print Page

Dahua HD Pinhole Network Camera Quick Start Guide

Note

The on-site listening operation is null during the bidirectional talk process.

1.3 Alarm Setup

Note

This function is only supported by some models of HD modular pinhole network camera.

The following figure shows the Alarm setup screen.

To set up the Alarm input and output, do the following:

1. Connect alarm input device to the alarm input port of I/O cable.

2. Connect alarm output device to the alarm output port of I/O cable, alarm output port can only

be connected to NO alarm device.

3. Open the WEB, and then configure the alarm input and output in Alarm. Alarm input on WEB

corresponds to the Alarm input of I/O cable. Because the alarm input device will generate

high or low level signal when there is alarm, the configurations are corresponding NO and

NC inputs.

4. Set the WEB alarm output. The alarm output corresponds to the alarm output of I/O cable.

Figure 1-9 Alarm setup screen